EPC Introduces 100V eGaN Power Transistor for High Power Density Power Conversion and Lidar Applications
EPC Introduces 100 V eGaN Power Transistor for High Power Density Power Conversion and Lidar Applications
The EPC2070 offers power systems designers a 100 V, 23 mΩ, power transistor capable of 34 A pulsed in an extremely small chip-scale package. These new devices are ideal for applications such as 60 W, 48 V power converters, Lidar, and LED lighting.
EL SEGUNDO, Calif. — December 2021 — Efficient Power Conversion (EPC) announces the EPC2070, a 100 V GaN transistor with a maximum RDS(on) of 23 mΩ and a 34 A pulsed output current for high efficiency power conversion in a tiny 1.1mm2 footprint.
Applications demanding higher efficiency and power density no longer have to choose between size and performance. In addition, the low cost of the EPC2070 brings the performance of GaN FETs at a price comparable to silicon MOSFETs. Applications benefiting from this performance, small size, and low cost include 48 V input power converters up to 60 W for computing and telecom systems, Time of flight (ToF) modules using VSCEL lasers for camera modules, laptops and smart phones, LED Lighting, and Class-D audio.
“The ability of eGaN based power devices to operate efficiently at high frequency widens the performance and cost gap with silicon. The 100 V, EPC2070, is a great addition to our 5th generation family of products offering designers the ability to go to higher power densities than what is possible with silicon MOSFETs.” said Alex Lidow, EPC’s CEO.
Development Board
The EPC90141 development board is a 100 V maximum device voltage half bridge with onboard gate drives, featuring the EPC2070 eGaN FETs. This 2” x 2” (50.8 mm x 50.8 mm) board is designed for optimal switching performance and contains all critical components for easy evaluation of the EPC2070.
Price and Availability
The EPC2070 eGaN FET is priced for 2.5K units at $0.67 each
The EPC90141 development board is priced at $123.75/each
EPC2070 and EPC90141 are available for purchase from Digi-Key at https://www.digikey.com/en/supplier-centers/epc.
About EPC
EPC is the leader in enhancement mode gallium nitride (eGaN®) based power management. eGaN FETs and integrated circuits provide performance many times greater than the best silicon power MOSFETs in applications such as DC-DC converters, remote sensing technology (lidar), motor drives for eMobility, robotics, and drones, and low-cost satellites.
eGaN is a registered trademark of Efficient Power Conversion Corporation, Inc.
- 【Datasheet】EPC2070 – Enhancement Mode Power Transistor DATA SHEET
- 【Datasheet】EPC2070 – Enhancement Mode Power Transistor
- +1 Like
- Add to Favorites
Recommend
- Sharge Selects GaN FETs EPC2218 from EPC for High-power USB PD Charger Retro 67 to Achieve the Most Efficient Power Conversion
- EPC Introduces The 40 V, 1.6 Milliohm EPC2069 EGaN® FET, it Can Range From 500 W to 2 KW and Exceed 98% Efficiency
- EPC Announces a New 3-phase BLDC Motor Drive Inverter Using the EPC2065 EGaN® FET
- EPC Launches 40V EPC2055 eGaN FET Ideal for High Power Density Solutions for USB-C Battery Chargers and Ultra-thin Point-of-Load Converters
- New Automotive Qualified GaN FETs EPC2204A and EPC2218A for Vehicle Electronics and Advanced Autonomy from EPC
- Efficient Power Conversion (EPC) Expands 100 V eGaN FET Family Offering Designers Best-in-Class Performance and Cost for 48 V DC-DC Conversion
- Design Higher Resolution Lidar Systems with New Automotive-Qualified GaN FET EPC2252 for Advanced Autonomy from EPC
- 65A ePower™ Chipset from Efficient Power Conversion (EPC) Redefines Power Conversion
This document is provided by Sekorm Platform for VIP exclusive service. The copyright is owned by Sekorm. Without authorization, any medias, websites or individual are not allowed to reprint. When authorizing the reprint, the link of www.sekorm.com must be indicated.
Integrated Circuits
Discrete Components
Connectors & Structural Components
Assembly UnitModules & Accessories
Power Supplies & Power Modules
Electronic Materials
Instrumentation & Test Kit
Electrical Tools & Materials
Mechatronics
Processing & Customization
