Development of Snap-in Type Aluminum Electrolytic Capacitors KVS/LVS Series Vibration Resistant Products for On-board Chargers
Nippon Chemi-Con has developed Snap-in Type Aluminum Electrolytic Capacitors KVS Series and LVS Series with improved vibration resistance.
Nippon Chemi-Con positions the car electronics market as a strategic market. These products are suited for on-board chargers for EVs and PHVs, where growth is expected in the future.
Nippon Chemi-Con has individually addressed the needs of Nippon Chemi-Con customers for such applications, but in response to growing needs, Nippon Chemi-Con has decided to mass-produce them as standard products. This is the first mass production of snap-in type aluminum electrolytic capacitors for on-board chargers.
Nippon Chemi-Con has achieved a vibration resistance performance of 10 to 2000Hz, two hours for each axis (X-Y-Z), and 15G vibration acceleration at the end of life (EOL) by embedding Nippon Chemi-Con proprietary specially structured pressure valve into the existing KMS Series and LXS Series.
Standard products of the KVS Series and LVS Series have a rated voltage range of 400 to 450V, case sizes φ30 x 25 Lmm to φ35 x 50 Lmm, and a capacitance range of 180 to 820µF.
[Samples and Mass Production]
The KVS Series and the LVS Series is scheduled to be available as samples from September 2016, and mass production is scheduled to start in October 2016. Production will be held at Chemi-Con Fukushima Corp. (a wholly owned subsidiary of Nippon Chemi-Con) Production also gradually start at Chemi-Con (Malaysia) Sdn. Bhd. as soon as the production system is prepared.
[Main Specifications (KVS/LVS)]
- Category temperature range: -25℃ to +105℃
- Endurance: guarantees 3,000 hours at 105℃ (KVS) and guarantees 5,000 hours at 105℃ (LVS)
- Vibration resistance: 10 to 2000 Hz, two hours for each axis, 15G at EOL
- Rated voltage range: 400 to 450V
- Capacitance range: 180 to 820µF
- Case size: φ30 x 25 to φ35 x 50 Lmm
- Rated ripple current: equivalent to the KMS/LXS Series
[Product Appearance]
- +1 Like
- Add to Favorites
Recommend
- Nippon Chemi-Con Added PMA Series Resin-Molded Chip Type Conductive Polymer Aluminum Solid Capacitors With a Low Profile of 3.0mm
- NIPPON CHEMI-CON Signs an Authorized Distributor Agreement with Sekorm
- Nippon Chemi-Con Expanded Product Line of Multilayer Ceramic Capacitors Improving Capacitance Density and with Higher Voltage Resistance
- Nippon Chemi-Con Added SMD Type Conductive Polymer Aluminum Solid Capacitors PXN Series with A Moisture Resistance of 1000 Hours at 85℃ 85% RH
- Nippon Chemi-Con to Supply Electric Double Layer Capacitors DLCAP™ for Passenger Vehicles
- Nippon Chemi-Con Expanded SMD Type Conductive Polymer Aluminum Solid Capacitors PXT Series Guaranteeing 1000 Hours at 85℃ 85%RH
- Nippon Chemi-Con GOB, MXB and HSF Sereis Aluminum Electrolytic Capacitors with an Upper Category Temperature of 150℃
- Nippon Chemi-Con Developed KWA Series Radial Lead Type Aluminum Electrolytic Capacitors Guaranteeing 5,000 hours at 105℃
This document is provided by Sekorm Platform for VIP exclusive service. The copyright is owned by Sekorm. Without authorization, any medias, websites or individual are not allowed to reprint. When authorizing the reprint, the link of www.sekorm.com must be indicated.