Nippon Chemi-Con Expanded Product Line of Multilayer Ceramic Capacitors Improving Capacitance Density and with Higher Voltage Resistance
Nippon Chemi-Con has expanded its product line of Multilayer Ceramic Capacitors: SMD type NTF Series, NTS Series, and metal cap type NTJ Series.
SMD Type NTF Series, NTS Series
Nippon Chemi-Con expanded the product capacitance range by adding products with improved capacitance density to Nippon Chemi-Con 25V to 100V rated voltage range products.
Conventionally, the NTF Series and NTS Series had a lineup of 25 to 250V-rated voltage products which are widely used in industrial equipment, power supplies, and telecommunications applications.
In recent years, there has been an increasing demand for higher capacitance in such applications. To meet these demands¸ Nippon Chemi-Con has adopted Nippon Chemi-Con proprietary dielectric material and developed new manufacturing processes, improving capacitance density. Improved capacitance density enables the downsizing of existing products with the same capacitance.
Main Specifications
Samples
Available from October 2021
Mass Production
Mass production was scheduled to start in April 2022 at Chemi-Con Yamagata Corp. Nagai Plant (a wholly owned subsidiary of Nippon Chemi-Con)
Metal cap type NTJ Series
Nippon Chemi-Con expanded the product voltage range by adding 500V-rated voltage products.
The NTJ Series has improved resistance to substrate bending by securing elements with metal caps. Nippon Chemi-Con metal cap-type products are capable of suppressing heat generation during use to a relatively small amount.
Conventionally, Nippon Chemi-Con has lined up 25V to 250V rated voltage products. They are widely used in automotive electronics, industrial equipment, medical equipment, power supplies, and telecommunications devices.
In recent years, there has been an increasing demand for higher voltage resistance in such applications. To meet these demands¸ Nippon Chemi-Con has adopted Nippon Chemi-Con proprietary dielectric material and developed new manufacturing processes, achieving higher voltage resistance.
Main Specifications
Samples
Available from November 2021
Mass Production
Mass production was scheduled to begin in February 2022 at Chemi-Con Yamagata Corp. Nagai Plant (a wholly owned subsidiary of Nippon Chemi-Con)
Product Appearance
SMD Type Multilayer Ceramic Capacitors NTF Series, NTS Series
Metal Cap Type Multilayer Ceramic CapacitorsNTJ Series
- +1 Like
- Add to Favorites
Recommend
- Nippon Chemi-Con Added PMA Series Resin-Molded Chip Type Conductive Polymer Aluminum Solid Capacitors With a Low Profile of 3.0mm
- NIPPON CHEMI-CON Signs an Authorized Distributor Agreement with Sekorm
- Nippon Chemi-Con Added SMD Type Conductive Polymer Aluminum Solid Capacitors PXN Series with A Moisture Resistance of 1000 Hours at 85℃ 85% RH
- Nippon Chemi-Con to Supply Electric Double Layer Capacitors DLCAP™ for Passenger Vehicles
- Nippon Chemi-Con Expanded SMD Type Conductive Polymer Aluminum Solid Capacitors PXT Series Guaranteeing 1000 Hours at 85℃ 85%RH
- Nippon Chemi-Con GOB, MXB and HSF Sereis Aluminum Electrolytic Capacitors with an Upper Category Temperature of 150℃
- Nippon Chemi-Con Developed KWA Series Radial Lead Type Aluminum Electrolytic Capacitors Guaranteeing 5,000 hours at 105℃
- Nippon Chemi-Con Developed Camera Module NCM-20-W Series for Immediate Detection Devices After Vehicle Reversing Motion
This document is provided by Sekorm Platform for VIP exclusive service. The copyright is owned by Sekorm. Without authorization, any medias, websites or individual are not allowed to reprint. When authorizing the reprint, the link of www.sekorm.com must be indicated.
Integrated Circuits
Discrete Components
Connectors & Structural Components
Assembly UnitModules & Accessories
Power Supplies & Power Modules
Electronic Materials
Instrumentation & Test Kit
Electrical Tools & Materials
Mechatronics
Processing & Customization
