Nippon Chemi-Con Added SMD Type Conductive Polymer Aluminum Solid Capacitors PXN Series with A Moisture Resistance of 1000 Hours at 85℃ 85% RH
Nippon Chemi-Con is expanding its product lineup with the addition of SMD Type Conductive Polymer Aluminum Solid Capacitors PXN Series. The Series complies with the standard of reliability tests (AEC-Q 200) for automotive passive components.
The PXN Series achieves a moisture resistance of 1,000 hours at 85℃ 85% RH, an improvement from the conventional 1,000 hours at 60℃ 95% RH. As a result, Nippon Chemi-Con is strengthening Nippon Chemi-Con's ability to propose products to the automotive electronics market in compliance with AEC-Q 200.
As the use of electronic control systems in automobiles is rapidly advancing, the ADAS (advanced driver assistance system) market is growing rapidly. Since automotive equipment is installed not only inside the cabin but also on the outside, exposure to low temperature and high humidity environments is expected depending on the area and climate they are used in. The PXN Series has been developed with these usage environments in mind.
Although Nippon Chemi-Con has already commercialized the PXD Series as conductive polymer aluminum solid capacitors for automotive applications, the newly developed PXN Series employs high-capacitance aluminum electrode foils and optimizes the element structure. As a result, the capacitance is up to 3.2 times higher than that of the PXD Series.
[Technical Features]
Highly reliable design for automotive applications
Achievement of AEC-Q 200 compliance by adopting an electrolyte and realizing high moisture resistance
[Samples and Mass Production]
Samples: October 2017
Mass production: October 2017
[Production Site]
Chemi-Con Miyagi Corp.
[Main Specifications]
- Category temperature range: -55℃ to 105℃
- Endurance: guarantees 5,000 hours at 105℃
- Moisture resistance: guarantees 1,000 hours at 85℃ 85%RH
[Product Appearance]
- +1 Like
- Add to Favorites
Recommend
- Nippon Chemi-Con Added PMA Series Resin-Molded Chip Type Conductive Polymer Aluminum Solid Capacitors With a Low Profile of 3.0mm
- NIPPON CHEMI-CON Signs an Authorized Distributor Agreement with Sekorm
- Nippon Chemi-Con Expanded Product Line of Multilayer Ceramic Capacitors Improving Capacitance Density and with Higher Voltage Resistance
- Nippon Chemi-Con to Supply Electric Double Layer Capacitors DLCAP™ for Passenger Vehicles
- Nippon Chemi-Con Expanded SMD Type Conductive Polymer Aluminum Solid Capacitors PXT Series Guaranteeing 1000 Hours at 85℃ 85%RH
- Nippon Chemi-Con GOB, MXB and HSF Sereis Aluminum Electrolytic Capacitors with an Upper Category Temperature of 150℃
- Nippon Chemi-Con Developed KWA Series Radial Lead Type Aluminum Electrolytic Capacitors Guaranteeing 5,000 hours at 105℃
- Nippon Chemi-Con Developed Camera Module NCM-20-W Series for Immediate Detection Devices After Vehicle Reversing Motion
This document is provided by Sekorm Platform for VIP exclusive service. The copyright is owned by Sekorm. Without authorization, any medias, websites or individual are not allowed to reprint. When authorizing the reprint, the link of www.sekorm.com must be indicated.