KHU/LHU Series Snap-in Type Aluminum Electrolytic Capacitors with Increased Voltage and Size Ranges, New Sizes at Heights of 65mm and Above (65/70/75/80L)
Nippon Chemi-Con announces it has developed new voltage ranges (400V to 450V) and new sizes (⌀30×65L to ⌀35×80Lmm) to expand the production selection of the KHU Series (guaranteed for 3,000 hours at 105℃) and the LHU Series (guaranteed for 5,000 hours at 105℃) of Snap-in Type Aluminum Electrolytic Capacitors. These capacitors are for power supply input smoothing and contribute to reduced size and increased endurance for switching PSU and general use invertors.
Snap-in type aluminum electrolytic capacitors are mainly used in the smoothing circuits of devices such as switching PSU. In recent years, the market has seen increased demand for higher capacitance for large-sized products used in server PSU due to an increase in designs that use single product with a height of 65mm or more that is horizontally positioned and that use mainly 450V. They have worked to develop products that respond to the demands of these PSU devices.
For the voltage range (added 400V to 450V), they have achieved increased endurance (3,000 to 5,000 hours guaranteed) without any significant changes in product characteristics compared to the KHE Series, the existing product that is guaranteed for 2,000 hours at 105℃.
They also are planning to add the size range of 65L to 80Lmm to their catalog. This surpasses the catalog standard size and represents the first time these sizes will be added to a catalog in industry.
KHU/LHU Performance Comparison with Existing KHE Series
Table figures: Capacitance (μF, 20℃, 120Hz) / Rated ripple current (Arms 105℃, 120Hz)
Technical Features
Increased voltage range: They extended the product lifetime through the optimal selection of high-capacitance electrode foil developed in-house.
Increased size range: They achieved higher reliability (increased vibration resistance) by optimizing the element structure.
Specifications of Newly Added Products
KHU Series (Endurance: Guaranteed for 3,000 hours at 105℃)
*1) ⌀25.4 excludes 65L and above
LHU Series (Endurance: Guaranteed for 5,000 hours at 105℃)
*2) 25 to 35L and 65L and above for ⌀25.4, ⌀30 excludes 25L
Samples and Mass Production
Samples: June 2023
Mass production: October 2023
Production Site
Chemi-Con East Japan Corp. Fukushima Plant
Product Appearance
- +1 Like
- Add to Favorites
Recommend
- Nippon Chemi-Con Added PMA Series Resin-Molded Chip Type Conductive Polymer Aluminum Solid Capacitors With a Low Profile of 3.0mm
- NIPPON CHEMI-CON Signs an Authorized Distributor Agreement with Sekorm
- Nippon Chemi-Con Expanded Product Line of Multilayer Ceramic Capacitors Improving Capacitance Density and with Higher Voltage Resistance
- Nippon Chemi-Con Added SMD Type Conductive Polymer Aluminum Solid Capacitors PXN Series with A Moisture Resistance of 1000 Hours at 85℃ 85% RH
- Nippon Chemi-Con to Supply Electric Double Layer Capacitors DLCAP™ for Passenger Vehicles
- Nippon Chemi-Con Expanded SMD Type Conductive Polymer Aluminum Solid Capacitors PXT Series Guaranteeing 1000 Hours at 85℃ 85%RH
- Nippon Chemi-Con GOB, MXB and HSF Sereis Aluminum Electrolytic Capacitors with an Upper Category Temperature of 150℃
- Nippon Chemi-Con Developed KWA Series Radial Lead Type Aluminum Electrolytic Capacitors Guaranteeing 5,000 hours at 105℃
This document is provided by Sekorm Platform for VIP exclusive service. The copyright is owned by Sekorm. Without authorization, any medias, websites or individual are not allowed to reprint. When authorizing the reprint, the link of www.sekorm.com must be indicated.