What is the HDI (High-Density Interconnect) Printed Circuit Boards?
High-density interconnects (HDI) PCB, represent one of the fastest-growing technologies in PCBs. Because of its higher circuitry density than traditional circuit boards, the HDI PCB design can incorporate smaller vias and capture pads, and higher connection pad densities. HDI Boards contain blind and buried vias and often contain micro vias of 0.006 or less in diameter.
By using HDI technology, designers now can place more components on both sides of the raw PCB if desired. Now as the development of via in pad and blind via technology, it allows designers to place smaller components closer together. This means faster transmission of signals and a significant reduction in signal loss and crossing delays.
HDI PCB is frequently found in mobile phones, touch-screen devices, laptop computers, digital cameras, 4G network communications, also prominently featured in medical devices.
Advantages of HDI PCB
The most common reason for using HDI technology is a significant increase in packaging density. The space obtained by finer track structures is available for components. Besides, overall space requirements are reduced will result in smaller board sizes and fewer layers.
Usually, FPGA or BGA are available with 1mm or less spacing. HDI technology makes routing and connection easy, especially when routing between pins.
Function improved by HDI PCB:
1. Denser trace routing
2. More stable power
3. Reduce interference inductance and capacitance effects
4. Improve signal integrity in high-speed design
Accelerate Development with HDI Printed Circuit Boards
1. Easier to place SMD components
2. Faster routing
3. Reduce frequent relocation of components
4. More component space (also by Via-in-Pad)
kartain HDI PCB manufacturing capabilities are in the following table:
- +1 Like
- Add to Favorites
Recommend
- Powerful AC to DC Rectification on Printed Circuit Boards
- What Are the Common Types of FPC Flexible Circuit Boards?
- PCB Adapters: Time-saving Termination Designed for Printed Circuit Boards with Thickness up to 2.4 mm
- Keysight Massively Parallel Board Test System Selected by LACROIX in Automotive Printed Circuit Board Manufacturing
- The Location where the Fuse is Connected to the Circuit and Connection Method of Patch Fuse in Circuit
- Keysight Introduces Next-Generation Radio Frequency Circuit Simulator for RFIC Chip Designers
- ZETTLER Displays Offers HDMI and USB Touch Backpack Boards for IPS LCD Modules up to 10.1”
- The Micro Inductor Supplier, Guangzhou Jinkai Electronics (CHK) and Sekorm Announced a Distribution Agreement
This document is provided by Sekorm Platform for VIP exclusive service. The copyright is owned by Sekorm. Without authorization, any medias, websites or individual are not allowed to reprint. When authorizing the reprint, the link of www.sekorm.com must be indicated.
Integrated Circuits
Discrete Components
Connectors & Structural Components
Assembly UnitModules & Accessories
Power Supplies & Power Modules
Electronic Materials
Instrumentation & Test Kit
Electrical Tools & Materials
Mechatronics
Processing & Customization
