The Location where the Fuse is Connected to the Circuit and Connection Method of Patch Fuse in Circuit
1. The location where the patch fuse is connected to the circuit
When connecting patch fuses in a circuit, it is important to be careful not to connect the fuse to the neutral or ground wire. The correct connection is to connect it to the live wire so that when the circuit is overloaded, the fuse can be blown promptly to protect circuit safety. If only connected to the neutral line or ground wire, the fuse should blow promptly, but the voltage carried by the positive and negative poles through the live wire may also cause the circuit to burn out. Therefore, the priority order for fuses to be connected to the circuit is the live wire, neutral wire, and ground wire.
2. Connection method of patch fuse in the circuit
Usually, fuses are connected in series in a circuit. If the fuses are connected in parallel in the circuit, the current cannot be disconnected promptly in case of abnormal conditions in the circuit. If you want to use overload protection for multiple circuits, multiple fuses can be connected in series in that circuit.
Fig.1
- +1 Like
- Add to Favorites
Recommend
- How to Choose a Patch Fuse?
- Application of Patch Fuse in Single Lithium Battery Protection Board
- How to Identify whether a Patch Fuse is Original or not?
- How to Choose the Rated Voltage and Current of Chip Fuses
- Some Knowledge about Patch Fuses
- What are the Types of Glass Tube Fuses
- What is the Function of Patch Self Recovery Fuses
- Experience in Selecting Self Recovering Fuses
This document is provided by Sekorm Platform for VIP exclusive service. The copyright is owned by Sekorm. Without authorization, any medias, websites or individual are not allowed to reprint. When authorizing the reprint, the link of www.sekorm.com must be indicated.