METRAFUSE FD PRO Fuse and Circuit Breaker Detector Operating Instructions
■Intended Use / Use for Intended Purpose:
▲The METRAFUSE FD PRO is a test instrument used for the speedy identification of which fuse or circuit breaker is protecting a circuit.
▲The METRAFUSE FD PRO consists of two parts: a receiver and a transmitter. The transmitter is connected to the circuit under test and uses the AC circuit's power to generate and inject a modified high frequency signal into the live conductor. The receiver is used to detect the signal from the transmitter and when put in contact with the fuse or circuit breaker that is connected to the circuit under test will indicate the presence of the transmitter signal both by LED and beeping.
▲Safety of the operator, as well as that of the instrument, is only assured when itJs used for its intended purpose.
[ fuse ][ circuit breaker ] |
|
User's Guide |
|
|
|
Please see the document for details |
|
|
|
|
|
|
|
English Chinese Chinese and English Japanese |
|
2/10.20 |
|
|
|
3-447-081-03 |
|
353 KB |
- +1 Like
- Add to Favorites
Recommend
- Determine if the Fuse is Burning (Fuse)?
- The Difference between Fuses and Fuses
- Repair Methods for Fuses -0805 Fuses
- What is the Structure of the Fuse?
- Very Fast Acting Fuse PICO® II Fuse Series, Designed for Battery Management System | Littelfuse
- Calculation Method for Melt Current of Fuse Fuses
- The Difference between Self Recovery Fuse and Blown Fuse
- The Location where the Fuse is Connected to the Circuit and Connection Method of Patch Fuse in Circuit
All reproduced articles on this site are for the purpose of conveying more information and clearly indicate the source. If media or individuals who do not want to be reproduced can contact us, which will be deleted.