Nippon Chemi-Con Developed Radial Lead Type Supercapacitors 2.7V Products DKG Series with Higher Withstand Voltage and Smaller Size
Nippon Chemi-Con has developed the DKG Series, which achieves higher withstand voltage and smaller size compared to radial lead type supercapacitors DKA Series. The DKA Series has been used in automotive power supply backup applications and has received many inquiries.
The DKG Series has a new material structure for higher withstand voltage and smaller size. The rated voltage has been increased from 2.5V to 2.7V, and the size has been reduced by up to 20%.
This will help optimize the design of equipment as a backup power supply for unlocking electric doors, shift-by-wire, EPS (electric power steering), and even drive recorders.
As before, acetonitrile (AN) solvent, which may cause cyanide gas, is not used as an electrolyte. AN has a low viscosity and makes lower resistance possible by using them as an electrolyte for supercapacitors. Therefore, it is widely used by manufacturers overseas. However, the DKG Series has a low resistance equivalent to or higher than that of products using AN.
Main Specifications
- Category temperature range: -40℃ to +65℃
- Rated voltage: 2.7V
- Capacitance: 50F
- DC internal resistance: 16mΩ (⌀18 x 40 L), 13mΩ (⌀18 x 50 L)
- Case size: ⌀18 x 40 and 50 Lmm (new ⌀10 x 40 L size scheduled)
- Endurance: guarantees 2000 hours at 65℃
Samples and Mass Production
Samples: April 2021
Mass production: April 2022
Production Site
Chemi-Con Yamagata Corp. Yonezawa Plant
Product Appearance
- +1 Like
- Add to Favorites
Recommend
- Nippon Chemi-Con Added PMA Series Resin-Molded Chip Type Conductive Polymer Aluminum Solid Capacitors With a Low Profile of 3.0mm
- NIPPON CHEMI-CON Signs an Authorized Distributor Agreement with Sekorm
- Nippon Chemi-Con Expanded Product Line of Multilayer Ceramic Capacitors Improving Capacitance Density and with Higher Voltage Resistance
- Nippon Chemi-Con Added SMD Type Conductive Polymer Aluminum Solid Capacitors PXN Series with A Moisture Resistance of 1000 Hours at 85℃ 85% RH
- Nippon Chemi-Con to Supply Electric Double Layer Capacitors DLCAP™ for Passenger Vehicles
- Nippon Chemi-Con Expanded SMD Type Conductive Polymer Aluminum Solid Capacitors PXT Series Guaranteeing 1000 Hours at 85℃ 85%RH
- Nippon Chemi-Con GOB, MXB and HSF Sereis Aluminum Electrolytic Capacitors with an Upper Category Temperature of 150℃
- Nippon Chemi-Con Developed KWA Series Radial Lead Type Aluminum Electrolytic Capacitors Guaranteeing 5,000 hours at 105℃
This document is provided by Sekorm Platform for VIP exclusive service. The copyright is owned by Sekorm. Without authorization, any medias, websites or individual are not allowed to reprint. When authorizing the reprint, the link of www.sekorm.com must be indicated.