MPM (Divider) Vishay Dale Thin Film Molded, SOT-23 Thin Film Resistor, Surface Mount Divider Network
●Vishay Dale Thin Film MPM Series Dividers provide ± 2 ppm/°C tracking and a ratio tolerance as tight as 0.01 %, small size, and exceptional stability for all surface mount applications. The standard SOT-23 package format with unity and common standard resistance divider ratios provide easy selection for most applications requiring matched pair resistor elements. The ratios listed are available for off the shelf delivery. If you require a non-standard ratio, consult the applications engineering group as we may be able to meet your requirements.
●FEATURES
■Excellent long term ratio stability(△R ± 0.015 %, 2000 h, + 70 °C)
■ Ratio tolerances to ± 0.01 %
■ Low TCR tracking ± 2 ppm
■ Standard JEDEC TO-236 package variation AB
MPM1003AWS 、 MPM 、 MPMT 、 MPM1002BW |
|
|
|
Datasheet |
|
|
|
Please see the document for details |
|
|
|
|
|
SOT-23 |
|
English Chinese Chinese and English Japanese |
|
12-Jul-13 |
|
Revision: 12-Jul-13 |
|
60001 |
|
139 KB |
- +1 Like
- Add to Favorites
Recommend
- DC/DC Converters MPM15, MPM15W, MPM20, MPM20W, MPD30, MPD30W Have Been Approved by Medical Safety EN60601-1
- Firstohm‘s Superior Anti-Surge Wire Wound Axial Resistor SSWA Series With a low-temperature coefficient and a wide temperature range
- EPC Launches 2kW, 48 V/12 V DC-DC converter for More Efficient, Smaller, Faster, Bidirectional Converters for Mild-Hybrid Cars
- TT Electronics EBW5216 Busbar Shunt Resistors for High Current Measurements in The Hundreds of Amps Range
- How To Use An EPC Development Board to Evaluate The Performance of A Given GaN FET or IC in Common Applications?
- How to Design a 2 kW 48 V/12 V Bi-Directional Power Module with packaged eGaN® FETs
- Neoway‘s Dust Monitoring System Speeds up Intelligent Transformation of Environmental Protection
- Application of Industrial 4G Lte Modem In Air Pollution Monitoring
All reproduced articles on this site are for the purpose of conveying more information and clearly indicate the source. If media or individuals who do not want to be reproduced can contact us, which will be deleted.