EPC Launches 2kW, 48 V/12 V DC-DC converter for More Efficient, Smaller, Faster, Bidirectional Converters for Mild-Hybrid Cars
The EPC9163 is a two-phase, 48 V – 12 V bidirectional converter that delivers 2 kW with 96.5% efficiency in small solution size for mild-hybrid cars and battery power backup units.
EL SEGUNDO, Calif.— November, 2021 — EPC announces the availability of the EPC9163, a 2 kW, two-phase 48 V – 12 V bidirectional converter that operates with 96.5 % efficiency in a very small footprint. The design of this demonstration board is scalable; that is, two converters can be paralleled to achieve 4 kW or three converters can be paralleled to achieve 6 kW. The board features eight EPC2218 100 V eGaN® FETs and is controlled by a module that includes the Microchip dsPIC33CK256MP503 16-bit digital controller.
The fast-switching speed and low losses of the eGaN® FETs allow the converter to operate at 500 kHz, which significantly reduces the size of the solution. The high switching frequency capability allowed the use of the extremely small IHTH-1125KZ-5A Vishay inductor in this design.
Overall, the DC-DC converter is three times faster, greater than 35% smaller and lighter, and offers greater than 1.5% higher efficiency, and lower overall system costs compared to silicon MOSFET solutions. Additionally, the excellent efficiency and thermal performance of GaN FETs enables air cooling instead of water cooling and the small size of the GaN FETs strongly reduce the size of heat-dissipating aluminum housing for additional system cost saving.
“eGaN FETs provide the fast switching, small size, and high efficiency needed to further reduce the size and weight of 48V – 12V automotive power system converters,”said Alex Lidow, CEO of EPC.“The EPC9163 is an ideal example of the capabilities of GaN FETs to increase frequency and efficiency to allow smaller inductance for less phases and higher power density.”
- 【Datasheet】Enhancement-Mode Gallium Nitride Technology
- 【Datasheet】Enhancement-Mode Gallium Nitride Technology
- 【Datasheet】Enhancement-Mode Gallium Nitride Technology
- +1 Like
- Add to Favorites
Recommend
- EPC Introduces EPC9157 48V to 12V Demo Board Featuring EPC eGaN FETs and New Renesas DC-DC Controller
- EPC‘s New EPC9165 Bidirectional Converter that Delivers 2kW with 96.8% Peak Efficiency
- Design High-Performance Class-D Audio Amplifiers with EPC’s New Reference Design EPC9192 and eGaN FETs
- Sharge Selects GaN FETs EPC2218 from EPC for High-power USB PD Charger Retro 67 to Achieve the Most Efficient Power Conversion
- EPC Announces EPC9193 eGaN® FET Based 3-Phase BLDC Motor Drive Inverter for Low-Cost E-Bikes, Drones and Robotics
- EPC Launches a 3-phase BLDC Motor Drive Inverter EPC9173 with Embedded Gate Driver Function and a Floating Power GaN FET with 3.3mΩ RDS(on)
- Sekorm Became an Authorized Distributor of EPC(Efficient Power Conversion), Which Brings GaN FET Products
- EPC GaN FETs Enable 75 - 231Ampere Laser Diode Control in Nanoseconds for Advanced Automotive Autonomy
This document is provided by Sekorm Platform for VIP exclusive service. The copyright is owned by Sekorm. Without authorization, any medias, websites or individual are not allowed to reprint. When authorizing the reprint, the link of www.sekorm.com must be indicated.