MPM (Divider) Vishay Dale Thin Film Molded, SOT-23 Thin Film Resistor, Surface Mount Divider Network
●Vishay Dale Thin Film MPM Series Dividers provide ± 2 ppm/°C tracking and a ratio tolerance as tight as 0.01 %, small size, and exceptional stability for all surface mount applications. The standard SOT-23 package format with unity and common standard resistance divider ratios provide easy selection for most applications requiring matched pair resistor elements. The ratios listed are available for off the shelf delivery. If you require a non-standard ratio, consult the applications engineering group as we may be able to meet your requirements.
●FEATURES
■Excellent long term ratio stability(△R ± 0.015 %, 2000 h, + 70 °C)
■ Ratio tolerances to ± 0.01 %
■Low TCR tracking ± 2 ppm
■ Standard JEDEC TO-236 package variation AB
MPM 、 MPM1003AWS 、 MPM1002BW 、 MPMT |
|
|
|
Datasheet |
|
|
|
Please see the document for details |
|
|
|
|
|
SOT-23 |
|
English Chinese Chinese and English Japanese |
|
12-Jul-13 |
|
Revision: 12-Jul-13 |
|
60001 |
|
139 KB |
- +1 Like
- Add to Favorites
Recommend
- Firstohm‘s Superior Anti-Surge Wire Wound Axial Resistor SSWA Series With a low-temperature coefficient and a wide temperature range
- 5-7.2GHz 802.11ax Wi-Fi Front-End Module CB5100, Features Chipset-specific Compatible Control Voltages to Facilitate Ease of Use
- EPC Launches 2kW, 48 V/12 V DC-DC converter for More Efficient, Smaller, Faster, Bidirectional Converters for Mild-Hybrid Cars
- TT Electronics EBW5216 Busbar Shunt Resistors for High Current Measurements in The Hundreds of Amps Range
- How To Use An EPC Development Board to Evaluate The Performance of A Given GaN FET or IC in Common Applications?
- Stable Voltage Diode BZT52C16 - 16V Regulating Value, 500mW Power, SOD-123 Package
- How to Design a 2 kW 48 V/12 V Bi-Directional Power Module with packaged eGaN® FETs
- RARA Would Like to Give Customers a “One-stop Solution” with All Kinds of Resistive Products
All reproduced articles on this site are for the purpose of conveying more information and clearly indicate the source. If media or individuals who do not want to be reproduced can contact us, which will be deleted.