Acroview Automated Chip Programmer Software Support the Programming of Haawking‘s Digital Signal Processor HXS320F28027PT*-ECD
Chip programming industry leader-Acroview Technology recently released the latest programming software update and a list of newly supported chip models, among which Haawking's digital signal processor HXS320F28027PT*-ECD has been programmed by Acroview's general-purpose Platform supported by AP8000.
HXS320F28027 is a fixed-point DSC platform product of Zhongke Haoxin, based on the self-developed H28x core, 32-bit fixed-point RISC-VDSP architecture. The chip is designed for white goods, motor drives, small servos, switching power supplies, and other industries, with professional peripherals such as ADC, ePWM, HRPWM, eOEP, eCAP, analog comparator, etc. At the same time, the backbone 10math and motor algorithm library specifically support applications such as FOC algorithm calculation with sensory/non-sensory angle analysis, small servo control, power supply voltage, and power stability.
Feature:
• Power-efficient 32-bit processor (H28x core)
Main frequency 120MHz (period 8.33ns)
Harvard bus architecture
Hardware multiply/divide unit
6-channel high-speed DMA
Fast interrupt response and handling
Unified memory programming model
Efficient code (using C/C++ and assembly language)
• Enhanced Control Peripherals
Enhanced Pulse Width Modulator (ePWM)
High Resolution PWM (HRPWM)
Enhanced Capture (eCAP)
Enhanced Quadrature Encoder Pulse (eQEP)
Analog-to-digital converters (ADCs)
On-chip temperature sensor
Comparators
• Silicon and system overhead
3.3V single power supply
No power-up sequence requirement
Integrated power-on and brown-out reset
Code Security Module
ADC external reference source
• Clock and system control
Two internal 12MHz zero-pin oscillators
On-chip oscillator/external clock input
Watchdog timer module function
Supports dynamic adjustment of phase-locked loop (PLL) multiplier coefficient
• Up to 22 individually programmable multiplexed GPIOs with input filtering
Peripheral Interrupt Extension (PIE) module that supports all peripheral interrupts
Three 32-bit CPU timers
Each ePWM module contains an independent 32-bit timer
On-chip memory
Flash, SRAM, OTP, and Boot ROM are available
• 128-bit security key/lock
Protect secure memory blocks
Prevent firmware reverse engineering
• Serial port peripherals
One SCI(UART) module
An SPI module
An inter-integrated circuit (I²C) bus advanced emulation feature
Analysis and breakpoint function packaging options
48-Pin Low Profile Quad Flat (LQFP) Package Temperature Options
Operating temperature T: -40℃ to 105℃
Operating temperature S: -40℃ to 125℃
Application
Electrical appliances
Medical, health, and fitness
Building automation
Motor driver
Electric vehicle, hybrid electric vehicle (EV/HEV) powertrain
Power delivery
Factory automation
Telecommunications infrastructure
Grid infrastructure
Architecture block diagram
The AP8000 universal programmer independently developed by Acroview Technology includes three parts: the host, the base plate, and the adapter seat.
The host supports USB and NET connections, allowing multiple IC programmers to be networked to achieve the purpose of simultaneously controlling multiple programmers to burn at the same time. The built-in chip safety protection circuit ensures that even if the chip is reversed or a short circuit caused by other reasons can be detected immediately and the power will be cut off to ensure the safety of the chip and programmer. Embedded high-speed FPGA greatly accelerates data transmission and processing. There is an SD card slot on the back of the main unit. Put the project file produced by the PC software into the root directory of the SD card and insert it into the card slot. The project file can be selected, loaded, and burned through the buttons on the programmer. command, in order to achieve the purpose of operating without a PC, which greatly reduces the cost of PC hardware configuration, and can be conveniently and quickly matched with the working environment.
AP8000 makes the mainframe more expandable by adding an adapter board to the backplane. Currently, it supports devices produced by all mainstream semiconductor manufacturers. Supported device types include NAND, NOR, MCU, CPLD, FPGA, EMMC, etc., and support file formats including Intel Hex, Motorola S, Binary, POF, etc.
- +1 Like
- Add to Favorites
Recommend
- Acroview Programmer AP8000 Support the Programming of TI Texas Instruments Fuel Gauge BQ27500DRZR-V130
- ACROVIEW Programmer Supports Chip Programming of AdvanceClip‘s 32-bit fixed-point digital proce
- At the time of setting sail, ACROVIEW Technology was awarded the recognition of Shenzhen‘s spec
- Universal Programmer AP8000 Supports Programming FuDanWei‘s Serial Flash Memory FM25Q16A
- Universal Programmer AP8000 Supports Programming TI‘s 32-Track PMBus Power Sequencer and System Manager UCD90320ZWSR
- Core Recording Micro‘s General Programming Platform AP8000 Support Programming TI‘s 32-bit Microcontroller TMS320F28066PZ
- Universal Programmer AP8000 Supports Programming of INGCHIPS‘ Low-power Bluetooth SoC Chip ING91880C
- Universal Programmer AP8000 Supports Programming TI‘s 32-bit Microcontroller TMS320F28377DPTPT
This document is provided by Sekorm Platform for VIP exclusive service. The copyright is owned by Sekorm. Without authorization, any medias, websites or individual are not allowed to reprint. When authorizing the reprint, the link of www.sekorm.com must be indicated.
Integrated Circuits
Discrete Components
Connectors & Structural Components
Assembly UnitModules & Accessories
Power Supplies & Power Modules
Electronic Materials
Instrumentation & Test Kit
Electrical Tools & Materials
Mechatronics
Processing & Customization
