Universal Programmer AP8000 Supports Programming FuDanWei‘s Serial Flash Memory FM25Q16A
Core Recording Micro Semiconductor recently released the programming software update and a list of newly supported chip models. FuDanWei's serial flash memory FM25Q16A has been supported by Core Recording Micro's general programming platform AP8000.
The FM25Q16A is a 16Mbit (2Mbyte) serial flash memory with an advanced write protection mechanism. FM25Q16A supports standard serial peripheral interface (SPI), dual/quad I/O, and 2-clock instruction cycle quad peripheral interface (QPI). They are ideal for hiding code in RAM, executing code directly from dual/quad SPI (XIP), and storing voice, text, and data.
The FM25Q16A can program 1 to 256 bytes at a time using the Page Program command. It is designed to allow single sector/block or full chip erase operations at a time. The FM25Q16A can be configured to protect part of the memory in software protection mode. The device can sustain at least 100K program/erase cycles per sector or block.
Overall block diagram
The AP8000 universal programmer independently developed by Core Micro Semiconductor includes three parts: the host, the base plate, and the adapter seat.
The host supports USB and NET connections, allowing multiple chip programmers to be networked to achieve the purpose of simultaneously controlling multiple programmers to burn at the same time. The built-in chip safety protection circuit ensures that even if the chip is reversed or a short circuit is caused by other reasons can be detected immediately and the power will be cut off to ensure the safety of the chip and programmer. Embedded high-speed FPGA greatly accelerates data transmission and processing. There is an SD card slot on the back of the main unit. Put the project file produced by the PC software into the root directory of the SD card and insert it into the card slot. The project file can be selected, loaded, and burned through the buttons on the programmer. command, in order to achieve the purpose of operating without a PC, which greatly reduces the cost of PC hardware configuration, and can be conveniently and quickly matched with the working environment.
AP8000 makes the mainframe more expandable by adding an adapter board to the backplane. Currently, it supports devices produced by all mainstream semiconductor manufacturers. Supported device types include NAND, NOR, MCU, CPLD, FPGA, EMMC, etc., and support file formats including Intel Hex, Motorola S, Binary, POF, etc.
- +1 Like
- Add to Favorites
Recommend
- Acroview Programmer AP8000 Support the Programming of TI Texas Instruments Fuel Gauge BQ27500DRZR-V130
- ACROVIEW Programmer Supports Chip Programming of AdvanceClip‘s 32-bit fixed-point digital proce
- At the time of setting sail, ACROVIEW Technology was awarded the recognition of Shenzhen‘s spec
- Universal Programmer AP8000 Supports Programming TI‘s 32-Track PMBus Power Sequencer and System Manager UCD90320ZWSR
- Core Recording Micro‘s General Programming Platform AP8000 Support Programming TI‘s 32-bit Microcontroller TMS320F28066PZ
- Universal Programmer AP8000 Supports Programming of INGCHIPS‘ Low-power Bluetooth SoC Chip ING91880C
- Universal Programmer AP8000 Supports Programming TI‘s 32-bit Microcontroller TMS320F28377DPTPT
- Acroview Programmer AP8000 to Support the Programming of AdvanceChip‘s 32-bit Fixed-point Digital Signal Processor ADP32F035QP80S
This document is provided by Sekorm Platform for VIP exclusive service. The copyright is owned by Sekorm. Without authorization, any medias, websites or individual are not allowed to reprint. When authorizing the reprint, the link of www.sekorm.com must be indicated.
Integrated Circuits
Discrete Components
Connectors & Structural Components
Assembly UnitModules & Accessories
Power Supplies & Power Modules
Electronic Materials
Instrumentation & Test Kit
Electrical Tools & Materials
Mechatronics
Processing & Customization
