Large Capacitance φ12.5 to φ18mm Products Added to the “MHB Series” SMD Type Aluminum Electrolytic Capacitors
Nippon Chemi-Con has now expanded the product lineup of the MHB series SMD Type Aluminum Electrolytic Capacitors by newly adding φ12.5 to φ18 mm products.
The products added this time have guaranteed durability of 1,500 to 3,000 hours at 125℃, and the ESR has been decreased by more than 50% compared to conventional products (MVH series) of the same size while the capacitance has been increased to a maximum of two times. The targets of these products are intended to be automotive electronics and power supplies.
In recent years, electronic control of automobiles has progressed rapidly, and even the installing position of electric control units (ECUs) has changed from the conventional inside cabin of the vehicle to outside the cabin and further to the engine room. While the engine ECUs installed in the engine room or near it are exposed to the radiation heat from the engine when the vehicle is traveling, they can also be exposed to extremely cold external air temperatures in cold regions.
Therefore, the performance expected of capacitors installed in an engine ECU is, of course, thermal stability in the high-temperature region, and also stable electrical properties (ESR properties) at temperatures near –40℃.
While the MVH series has been available as products with high-temperature tolerance (125℃) with sizes of φ12.5 to φ18 mm, the MHB series developed this time uses a high capacitance electrode foil and has a large area of the electrode opposite the aluminum electrode foil, achieving the capacitance to a maximum of two times that of the conventional products.
Further, in order to improve the electrical characteristics under low temperatures required in the automotive electronics field, the MHB series employs a high-performance electrolyte that has low variations in the properties at low temperatures and low transpiration at high temperatures. Because of this, a low ESR at -40℃ is realized.
Apart from this, the MHB series also has vibration proof structures and can be used with lead-free mounting methods.
Mass Production
Already started.
Specifications
Category temperature range: –40℃ to +125℃
Rated voltage: 25V to 100V
Capacitance: 75 to 3,300μF
Case size: Total 6 sizes from φ12.5 × 13.5 L mm to φ18 × 21.5 L mm
Endurance with ripple current: at 125℃:
1,500 hours (KE0, KG5)
2,000 hours (LH0, MH0)
3,000 hours (LN0, MN0)
After durability test ESR (20℃, –40℃) standard
Initial ESR typical values (MVH/MHB comparison, the ratio of MHB grade is the ratio of reduction of ESR relative to MVH)
Typical values of rated capacitances (MVH/MHB comparison, the ratio of MHB grade is the ratio of increase of capacitance relative to MVH)
- +1 Like
- Add to Favorites
Recommend
- Nippon Chemi-Con Developed MHK Series SMD-Type Aluminum Electrolytic Capacitors Guaranteeing Operation at 125℃ with a Smaller Size
- Nippon Chemi-Con Added PMA Series Resin-Molded Chip Type Conductive Polymer Aluminum Solid Capacitors With a Low Profile of 3.0mm
- NIPPON CHEMI-CON Signs an Authorized Distributor Agreement with Sekorm
- Nippon Chemi-Con Expanded Product Line of Multilayer Ceramic Capacitors Improving Capacitance Density and with Higher Voltage Resistance
- Nippon Chemi-Con Added SMD Type Conductive Polymer Aluminum Solid Capacitors PXN Series with A Moisture Resistance of 1000 Hours at 85℃ 85% RH
- Nippon Chemi-Con to Supply Electric Double Layer Capacitors DLCAP™ for Passenger Vehicles
- Nippon Chemi-Con Expanded SMD Type Conductive Polymer Aluminum Solid Capacitors PXT Series Guaranteeing 1000 Hours at 85℃ 85%RH
- Nippon Chemi-Con GOB, MXB and HSF Sereis Aluminum Electrolytic Capacitors with an Upper Category Temperature of 150℃
This document is provided by Sekorm Platform for VIP exclusive service. The copyright is owned by Sekorm. Without authorization, any medias, websites or individual are not allowed to reprint. When authorizing the reprint, the link of www.sekorm.com must be indicated.