Vincotech VINcoBOOST X4 Modules Switching Frequencies from 8 to 20kHz for 100 to 200kVA Three-phase PFC Applications
VINcoBOOST X4 products for 100 to 200 kVA three-phase PFC applications
Vincotech unveiled the VINcoBOOST X4 modules designed for UPS and other three-phase PFC applications with power ratings from 100 to 200 kVA and switching frequencies from 8 to 20kHz. VINcoBOOST X4 modules serve grid-connected UPS and other applications requiring three-phase, three-level active PFC. They are the solutions of choice wherever high conversion efficiency and fast switching frequencies are needed to decrease PFC chokes' size and cost. Onboard capacitors prevent destructive turn-off voltage overshooting. An optional snubber diode and a low inductive interface support switching loss-regeneration. The latter also enables an ultra-low-inductive connection to be made to a normal PCB board, in which case the high-power connection no longer needs to be low-inductive. The integrated NTC sensor provides a temperature signal to ensure reliable protection for the VINcoBOOST X4 module. The 400 and 600 A versions of the VINcoBOOST X4 are available with and without snubber diodes. Vincotech also offers the option of pre-applied thermal interface material designed for ultra-high performance.
General features:
High efficiency symmetric boost
Integrated DC-link capacitor
Low DC inductance (< 5 nH)
Screw terminals
VINcoBOOST X4 schematic
VINcoBOOST X4 modules at a glance
- +1 Like
- Add to Favorites
Recommend
- Vincotech VINcoMNPC X4 Power Module Provides up to 800A and Suitable for Solar and UPS Applications up to 250kW
- VIncotech’s Mid-power VINcoPACK E3 in A Low-profile Package for Motion Control and UPS Applications
- Vincotech Rolls Out New Online Simulation Tool VINcoSIM, the First Simulator Launch from A Webpage
- Vincotech’s VINco E3 is Available in 650V, 1200V, and 1700V Versions to Satisfy Market Demand for Mid-power Inverters
- Vincotech‘s New Power Module VINcoNPC X12, Suitable for 1500V DC-link Applications Up to 1MW
- New 1200 V Sixpack Solution for Servo Drive Applications and Line Converters for Elevator Drives| Vincotech
- New 600 V FlowPIM 1 + PFC Family for Power Ranges up to 8 Kw | Vincotech
- Vincotech Joins the Charging Interface Initiative at 2018
This document is provided by Sekorm Platform for VIP exclusive service. The copyright is owned by Sekorm. Without authorization, any medias, websites or individual are not allowed to reprint. When authorizing the reprint, the link of www.sekorm.com must be indicated.