AN for VINcoMNPC X12 (LC09FP70) Vincotech gate driver
Abstract:
This application note describes the gate driver for 70-W612NMA1K8M702-LC09FP70 Vincotech three-level module. The AN will give a short description of the power module and a definition of the suitable Vincotech gate driver for this 1200 V/1800 A MNPC (T-Type) power module.
Introduction:
The 70-W612NMA1K8M702-LC09FP70 is a new member of the Vincotech MNPC power modules family VINcoMNPC X12 with increased power range. It’s a new entrant featuring the VINco X12 housing and a fresh member in the MNPC topology. The IGBT M71200 V,IGBT M7 600 V,diode M7 1200 V and diode M7 650 V offer a perfect match for the VINcoMNPC X12 family.The new chip generation offers lower V-CEsat which results lower static losses that are significant in this application. With its power range 1200 V/1800 A targets the Solar PV Central Inverter market.
Technical Documentation |
|
|
|
Please see the document for details |
|
|
|
|
|
|
|
English Chinese Chinese and English Japanese |
|
2018.10.31 |
|
Rev. 01 |
|
|
|
5.4 MB |
- +1 Like
- Add to Favorites
Recommend
- Vincotech Rolls Out New Online Simulation Tool VINcoSIM, the First Simulator Launch from A Webpage
- Vincotech VINcoBOOST X4 Modules Switching Frequencies from 8 to 20kHz for 100 to 200kVA Three-phase PFC Applications
- VIncotech’s Mid-power VINcoPACK E3 in A Low-profile Package for Motion Control and UPS Applications
- Vincotech‘s New Power Module VINcoNPC X12, Suitable for 1500V DC-link Applications Up to 1MW
- Vincotech’s VINco E3 is Available in 650V, 1200V, and 1700V Versions to Satisfy Market Demand for Mid-power Inverters
- Vincotech VINcoMNPC X4 Power Module Provides up to 800A and Suitable for Solar and UPS Applications up to 250kW
- VINCOTECH Launched flowSPFC 0 - 650V/10-30kW Power Factor Correction Module for the UPS
- Vincotech Launches MiniSKiiP and Flow Series Tandem Diodes for Motion Control Application Solutions
All reproduced articles on this site are for the purpose of conveying more information and clearly indicate the source. If media or individuals who do not want to be reproduced can contact us, which will be deleted.