Nippon Chemi-Con Added High Withstand Voltage Products with 550V Rated Voltage LXS Series Snap-in Type Aluminum Electrolytic Capacitors
Nippon Chemi-Con has now added a lineup of products with rated voltage increased up to 550 volts to the "LXS Series" Snap-in Type Aluminum Electrolytic Capacitors for power supply input smoothing. This product would help to make switching power supplies, general purpose inverters, and other equipment smaller and give them longer life.
The LXS series of snap-in type aluminum electrolytic capacitors are compact and have a long life. They have very good durability being guaranteed for 5000 hours at 105℃. They are popular for use in switching power supplies and general-purpose inverters because they help to increase the service life and reduce the need for maintenance of such products.
The demand for LXS series capacitors has been increasing recently because of the increase in solar power generation which uses them in power conditioners and the servers used in data centers.
Up until now, the LXS series had products with rated voltages in the 160 to 500-volt range. Because of the expectations for a higher voltage smoothing capacitor, Nippon Chemi-Con developed a 550-volt model which is the highest rated voltage in the industry for a snap-in type capacitor. This was possible by the adoption of materials.
The 550-volt LXS series product uses the same internally developed aluminum electrode foil as that used in the 550-volt "KMS series" product that is being released at the same time. This foil has made a high voltage, high capacitance, and long life product possible.
Sample Availability and Mass Production Schedule
Samples of the LXS series product with a rated voltage of 550 volts have already started shipping in April 2015, and mass production was duled to start in September 2015.
Main Specifications (550 V rated voltage)
- Category temperature range: -25℃ to +105℃
- Endurance: 5000 hours guaranteed at 105℃
- Rated voltage: 550VCapacitance range: 120 to 390μF
- Case size: φ30×30 L to φ35×60 L mm
Product Appearance
- +1 Like
- Add to Favorites
Recommend
- Nippon Chemi-Con Added Snap-in Type Aluminum Electrolytic Capacitors LXS and KMS Series with 600V ultra-high Withstand Voltage
- Nippon Chemi-Con Developed Snap-in Type Aluminum Electrolytic Capacitors GXA Series with A High Heat Resistance of 125℃
- Nippon Chemi-Con Added PMA Series Resin-Molded Chip Type Conductive Polymer Aluminum Solid Capacitors With a Low Profile of 3.0mm
- NIPPON CHEMI-CON Signs an Authorized Distributor Agreement with Sekorm
- Nippon Chemi-Con Expanded Product Line of Multilayer Ceramic Capacitors Improving Capacitance Density and with Higher Voltage Resistance
- Nippon Chemi-Con Developed LHJ Series Snap-in Type Aluminum Electrolytic Capacitors with Longer Life and Higher Ripple for Industrial Inverters
- Nippon Chemi-Con Added SMD Type Conductive Polymer Aluminum Solid Capacitors PXN Series with A Moisture Resistance of 1000 Hours at 85℃ 85% RH
- Nippon Chemi-Con to Supply Electric Double Layer Capacitors DLCAP™ for Passenger Vehicles
This document is provided by Sekorm Platform for VIP exclusive service. The copyright is owned by Sekorm. Without authorization, any medias, websites or individual are not allowed to reprint. When authorizing the reprint, the link of www.sekorm.com must be indicated.
Integrated Circuits
Discrete Components
Connectors & Structural Components
Assembly UnitModules & Accessories
Power Supplies & Power Modules
Electronic Materials
Instrumentation & Test Kit
Electrical Tools & Materials
Mechatronics
Processing & Customization
