Nippon Chemi-Con Added to MHK Series SMD Type Aluminum Electrolytic Capacitors with a Smaller Size
Nippon Chemi-Con has now added a smaller sized (φ5×8.0 L mm) surface mounted aluminum electrolytic capacitors to the "MHK Series." This product would help to make electronic equipment for use in automobile engine rooms smaller.
With the increased use of electronic controls for automobiles, the ECUs (Electronic Control Units) have been moving from the passenger compartment to the engine room.
Temperatures in engine rooms can range from a high range caused by the heat radiated from engines during operation and a low range when parked because of exposure to outside temperatures. Therefore, capacitors must be capable of performing stably at low temperatures down to -40℃ and high temperatures around +125℃. In addition, ECU units are growing smaller, so they must not only perform reliably within a wide temperature range, but they must also be as small as possible.
Nippon Chemi-Con developed the MHK series to meet this demand for a highly reliable product that can cover the -40 to +125℃ temperature range. In order to help make ECUs even more space-saving and improve their reliability, the company has developed a smaller product to add to the series φ5×8.0 L mm, and its product volume has been reduced by about 40 percent.
Technological Points
The development points for this product were as follows:
- By adopting a high-capacity foil and optimizing the aluminum foil of the opposite electrode area, Nippon Chemi-Con was able to ensure capacitance equivalent to the previous product with a smaller form factor.
- The company adopted a sealing material with excellent sealing performance and an electrolytic solution with composition and designed the product with consideration for the ESR value at a lower temperature after endurance.
Taking the environment into consideration, the product is compatible with lead-free soldering.
Sample Availability and Mass Production Schedule
Samples: August 2015
Mass production: February 2016
Production Location
Chemi-Con Miyagi Corporation
Main Specifications
- Category temperature range: -40℃ to +125°C
- Endurance: 2,000 hours at 125℃
Product added at this time (Product size: φ5 × 8.0 Lmm)
Produce Appearance
- +1 Like
- Add to Favorites
Recommend
- Nippon Chemi-Con Developed MHK Series SMD-Type Aluminum Electrolytic Capacitors Guaranteeing Operation at 125℃ with a Smaller Size
- Nippon Chemi-Con Added PMA Series Resin-Molded Chip Type Conductive Polymer Aluminum Solid Capacitors With a Low Profile of 3.0mm
- NIPPON CHEMI-CON Signs an Authorized Distributor Agreement with Sekorm
- Nippon Chemi-Con Expanded Product Line of Multilayer Ceramic Capacitors Improving Capacitance Density and with Higher Voltage Resistance
- Nippon Chemi-Con Added SMD Type Conductive Polymer Aluminum Solid Capacitors PXN Series with A Moisture Resistance of 1000 Hours at 85℃ 85% RH
- Nippon Chemi-Con to Supply Electric Double Layer Capacitors DLCAP™ for Passenger Vehicles
- Nippon Chemi-Con Expanded SMD Type Conductive Polymer Aluminum Solid Capacitors PXT Series Guaranteeing 1000 Hours at 85℃ 85%RH
- Nippon Chemi-Con GOB, MXB and HSF Sereis Aluminum Electrolytic Capacitors with an Upper Category Temperature of 150℃
This document is provided by Sekorm Platform for VIP exclusive service. The copyright is owned by Sekorm. Without authorization, any medias, websites or individual are not allowed to reprint. When authorizing the reprint, the link of www.sekorm.com must be indicated.