Nippon Chemi-Con Updates KHE Series Snap-in Type Aluminum Electrolytic Capacitors with Approximately 20% Higher Capacitance
Nippon Chemi-Con has updated snap-in type aluminum electrolytic capacitors KHE Series for input smoothing of power supplies. The Series contributes to the downsizing and thinning of switching power supplies and general-purpose inverters.
Snap-in type aluminum electrolytic capacitors are mainly used for smoothing circuits of switching power supplies. The spread of cloud services has led to a recent increase in demand for products for data center servers, and the expansion of markets related to IT and communications infrastructure has become noticeable. Nippon Chemi-Con released the ultracompact KHE Series in January 2020 to meet the demand for downsizing and space-saving of these power supplies.
However, the demand for downsizing and space-saving of power supplies in the market has become stronger and the downsizing of aluminum electrolytic capacitors, which are passive components, has become a continuous technical issue. From this background, Nippon Chemi-Con aimed for further downsizing and continued development to upgrade the performance of the KHE Series.
The rated voltage and sizes of the upgraded KHE Series are the same as the existing products, each having 400 to 450V and ⌀25.4×25L to ⌀35×60Lmm. The capacitance range is 210μF to 1,500μF, achieving a maximum of approximately 20% higher capacitance per volume compared to the existing KHE Series. In this development, Nippon Chemi-Con has achieved performance improvement by adopting new materials for higher capacitance and reliability whilst maintaining the basic performances of the existing KHE Series.
Samples and Mass Production
Samples and mass production of the upgraded KHE Series have been available since September 2021.
Main Specifications
Category temperature range: -40℃ to +105℃
Rated voltage range: 400V to 450V
Capacitance range: 210μF to 1,500μF
Case size: ⌀25.4×25L to ⌀35×60Lmm
Endurance: guarantees 2,000 hours at 105℃
Production Site
Chemi-Con East Japan Corp. Fukushima Plant
Product Appearance
Upgraded KHE Series - 450V-1,000μF, ⌀30×60Lmm size product
- +1 Like
- Add to Favorites
Recommend
- Nippon Chemi-Con Developed KHE Series Snap-in Type Aluminum Electrolytic Capacitors with Small Size and a 105℃ Heat Resistance
- Nippon Chemi-Con Developed KWA Series Radial Lead Type Aluminum Electrolytic Capacitors Guaranteeing 5,000 hours at 105℃
- Nippon Chemi-Con Expanded Size Range of KHF/KWB Series Radial Lead Type Aluminum Electrolytic Capacitors, Increasing capacitance by up to 20%
- Nippon Chemi-Con Added PMA Series Resin-Molded Chip Type Conductive Polymer Aluminum Solid Capacitors With a Low Profile of 3.0mm
- NIPPON CHEMI-CON Signs an Authorized Distributor Agreement with Sekorm
- Nippon Chemi-Con Expanded Product Line of Multilayer Ceramic Capacitors Improving Capacitance Density and with Higher Voltage Resistance
- Nippon Chemi-Con Added SMD Type Conductive Polymer Aluminum Solid Capacitors PXN Series with A Moisture Resistance of 1000 Hours at 85℃ 85% RH
- Nippon Chemi-Con to Supply Electric Double Layer Capacitors DLCAP™ for Passenger Vehicles
This document is provided by Sekorm Platform for VIP exclusive service. The copyright is owned by Sekorm. Without authorization, any medias, websites or individual are not allowed to reprint. When authorizing the reprint, the link of www.sekorm.com must be indicated.