SL3088E 3.0V-5.5V, 15kV HBM ESD-Protected, 14Mbps Half-Duplex RS485/RS422 Transcelver

2024-01-12
●SL3088E is a RS -485 transceiver with 3.0V~5.5V wide power supply, bus port ESD protection capacity of over 15kV HBM, bus withstand voltage range of ±15V, half duplex, low power consumption, and fully meet the requirements of TIA / EIA-485 standard.
●SL3088E includes a driver and a receiver, both of which can be enabled and closed independently.
●When both are disabled, both the driver and the receiver output are high resistance state. SL3088E has 1/8 load, which allows 256 SL3088E transceivers to be connected to the same communication bus. It can realize error-free data transmission up to 14Mbps.
●SL3088E has a working voltage range of 3.0~5.5V, and has the functions of fail-safe, current-limiting protection, over-voltage protection, etc.
■3.0V~5.5V Wide Power Range, Half-Duplex
■ESD Protection for RS-485 I/O Pins ±15kV, Human Body Model
■Bus Fault Tolerance and Withstand Voltage Reach ±15V
■1/8 Unit Load,Allow Up to 256 Transceivers on the Bus
■Driver Short-Circuit Output Protection
■Low Power Off Function
■Receiver Open-Circuit Failure Protection
■Strong Anti-Noise Ability
■Integrated Transient Voltage Suppression Function
■Data transmission up to 14Mbps in an electric noise environment
■Available in SOP8, DIP8, MSOP8/8μMAX/VSSOP8 and DFN3*3-8 packages

SLKOR

SL3088ESL3088EESASL3088EEUASL3088EEPASL3088ETK

More

Part#

HBM ESD-Protected, 14Mbps Half-Duplex RS485/RS422 TranscelverRS-485 transceiverhalf-duplex high-speed transceiver

More

More

Datasheet

More

More

Please see the document for details

More

More

SOP8;DIP8;MSOP8;8μMAX;VSSOP8;DFN3*3-8

English Chinese Chinese and English Japanese

16 December 2019

Rev.1

1.7 MB

- The full preview is over. If you want to read the whole 17 page document,please Sign in/Register -
  • +1 Like
  • Add to Favorites

Recommend

All reproduced articles on this site are for the purpose of conveying more information and clearly indicate the source. If media or individuals who do not want to be reproduced can contact us, which will be deleted.

Contact Us

Email: