CMOS Analog Switches DG304B, DG306B, DG307B Vishay Siliconix
● DESCRIPTION:
■ The DG304B, DG306B and DG307B monolithic CMOS switches were designed for applications in communications, instrumentation and process control. This series is well suited for applications requiring fast switching and nearly flat on-resistance over the entire analog range.
■ Designed on the Vishay Siliconix PLUS-40 CMOS process to achieve low power consumption and excellent on/off switch performance, these switches are ideal for battery powered applications, without sacrificing switching speed.
■ Break-before-make switching action is guaranteed, and an epitaxial layer prevents latchup. Single supply operation (for positive switch voltages) is allowed by connecting the V- rail to 0 V.
■ Each switch conducts equally well in both directions when on, and blocks up to the supply voltage when off. These switches are CMOS input compatible
● FEATURES:
■ ±15 V input range
■ Fast switching - t-ON : 110 ns
■ Low R-DS(on) : 30 Ω
■ Single supply operation
■ CMOS logic levels
■ Micropower: 30 nW
● BENEFITS:
■ Full rail-to-rail analog signal range
■ Low signal error
■ Wide dynamic range
■ Low power dissipation
DG304B 、 DG306B 、 DG307B 、 DG304BDJ 、 DG306BDJ 、 DG307BDJ 、 DG304BDJ-E3 、 DG306BDJ-E3 、 DG307BDJ-E3 |
|
[ Low level switching circuits ][ Programmable gain amplifiers ][ Portable ][ battery powered systems ][ communications ][ instrumentation ] |
|
Datasheet |
|
|
|
Please see the document for details |
|
|
|
|
|
14-Pin Plastic DIP |
|
English Chinese Chinese and English Japanese |
|
28-Feb-11 |
|
Rev. D |
|
71403 |
|
242 KB |
- +1 Like
- Add to Favorites
Recommend
- Firstohm‘s Superior Anti-Surge Wire Wound Axial Resistor SSWA Series With a low-temperature coefficient and a wide temperature range
- EPC Launches 2kW, 48 V/12 V DC-DC converter for More Efficient, Smaller, Faster, Bidirectional Converters for Mild-Hybrid Cars
- TT Electronics EBW5216 Busbar Shunt Resistors for High Current Measurements in The Hundreds of Amps Range
- How To Use An EPC Development Board to Evaluate The Performance of A Given GaN FET or IC in Common Applications?
- How to Design a 2 kW 48 V/12 V Bi-Directional Power Module with packaged eGaN® FETs
- Single -channel High Speed 15 MBd CMOS optocoupler QX0720
- 8Mb to 128Mb High-Speed CMOS PSRAMs in 6mmx7mmx1mm 48-ball FPBGA and 4mmx4mmx1mm 49-ball FPBGA packages
- Alliance Memory Launched x32 High-Speed CMOS SDRAMs in 90-Ball TFBGA and 86-Pin TSOP II Packages
All reproduced articles on this site are for the purpose of conveying more information and clearly indicate the source. If media or individuals who do not want to be reproduced can contact us, which will be deleted.