AS1800 Omnipolar Detection High Performance Low Power Hall-Effect Sensor IC
●Using low power CMOS process, the AS1800 is designed for low power, high performance omnipolar detection hall-effect application, such as cover switch, contactless switch, solid state switch and lid close sensor etc battery operation. The hall IC integrated an on-chip hall voltage generator for magnetic sensing, a comparator that amplifiers the hall voltage, a Chopper amplifier, a Schmitt trigger to provide switching hysteresis for noise rejection, and a complementary output.
●The total power consumption of AS1800 is typically less than 1.8uA at 1.8V power supply. AS1800 is designed to respond to alternating North and South poles. When the magnetic flux density (B) is larger than operate point (BOP ), the output will be turned on (low), the output is held until the magnetic flux density (B) is lower than release point (BRP ), then turn off (high).
●The device is available in DFN1216-4L, SOT553, and TSOT23-3L Package and is rated over the -40°C to 85°C. The all packages are RoHS and Green compliant.
■Features
●Input Voltage Range : 1.65V to 5.5V
●Micro-power consumption ideal for battery power applications
●Omniplar Operation, easy to use as output
●Very high sensitivity hall sensor
●Low Power CMOS process technology
●Chopper stabilization amplifier stage
●Magnetic Sensitivity (typical) BOP=±30Gauss, BRP =±20Gauss
●Good RF noise immunity
●No need pull-up resistor
●Small Solution Size
●RoHS & Green Compliant
●DFN1216-4L, SOT553 & TSOT23-3L Packages
●-40°C to +85 °C Temperature Range
AS1800 、 AS1800XXX 、 AS1800D4RN 、 AS1800WRN 、 AS1800TWRN |
|
Omnipolar Detection High Performance Low Power Hall-Effect Sensor IC 、 Magnetic Sensor IC |
|
[ omnipolar detection hall-effect application ][ Cover switch ][ clam-shell cellular phones ][ Notebook ][ PC ][ PAD ][ Contact-less switch ][ consumer products ][ Solid State Switch ][ Handheld Wireless Handset Awake Switch ][ battery-powered device ][ reed switch ][ low duty cycle applications ][ DV ][ DSC ][ White Goods ] |
|
Datasheet |
|
|
|
Please see the document for details |
|
|
|
|
|
DFN1216-4L;SOT553;TSOT23-3L |
|
English Chinese Chinese and English Japanese |
|
05,Aug. 2021 |
|
Version 1.5 |
|
|
|
253 KB |
- +1 Like
- Add to Favorites
Recommend
- More than 250 IC Manufacturers Choose Sekorm as Authorized Distributor, Building Supply Chain Security
- How To Use An EPC Development Board to Evaluate The Performance of A Given GaN FET or IC in Common Applications?
- Shindengen Launches MF2007SW High-side Nch-MOSFET Gate Driver IC with Reverse Connection and Reverse Current Protection
- MindMotion Honored with Annual Innovative IC Design Award
- Shenzhen Car Charging Chip Factory: Notes on IC Unpacking and IC Storage Methods
- EPC21601 eToF Laser Driver IC Wins ASPENCORE’s World Electronics Achievement Award – Product of the Year 2021 Power Semiconductor / Driver IC
- the concept of detecting wire bond deformations of an IC using Keysight VTEP technology
- Machined Pin Header and IC Socket
All reproduced articles on this site are for the purpose of conveying more information and clearly indicate the source. If media or individuals who do not want to be reproduced can contact us, which will be deleted.