MindMotion Honored with Annual Innovative IC Design Award

PublishTime： 2024-04-09 Article Source：MindMotion News

Recently, MindMotion was invited to participate in the 2024 International Integrated Circuit Exhibition and Symposium (IIC) hosted by Aspencore. MindMotion once again won the China IC Design Achievement Award. As a domestic provider of general-purpose 32-bit MCU products and solutions, this award fully validates the market and customer recognition of MindMotion's professionalism. MindMotion will continue to provide comprehensive support to customers, ranging from hardware chips to software algorithms, from reference designs to system integration.

During the event, Hu Lixing, the Director of MindMotion Motor Products, delivered a speech entitled "Towards Focus - MindMotion High-Integration Motor MCU," elucidating the MindMotion product matrix and new motor products.

The speech focused on MindMotion popular chips: MM32G0001, MM32SPIN0230, MM32SPIN030C, MM32SPIN080C, MM32SPIN0280, as well as the new products to be launched this year: MM32SPIN080G (including DC/DC), MM32SPIN060G (including four-wire burning), MM32SPIN045C (including MOSFET).

[New Product Preview]

MM32SPIN080G

(with DC/DC)

MM32SPIN080G is a high-performance single motor control SOC product under MindMotion MindSPIN, which adopts Cortex-M0 core and integrates a 200V three-phase N-channel gate driver.

Storage and computational resources: 32KB Flash, 4KB SRAM, maximum main frequency of 60MHz.
7 timer resources: 1 16-bit advanced timer, 1 32-bit general-purpose timer, 3 basic timers, 1 12-bit IWDG, 1 24-bit Systick.
Supports 2 channels of DMA.
Hardware divider HW-Div.
1 12-bit analog-to-digital converter ADC supports 11 channels, sampling rate of 1Msps.
2 channels of analog comparators COMP, 2 channels of rail-to-rail operational amplifiers OPAMP.
Three-phase N-channel gate driver.
Supports UART/SPI communication.
LDO operating voltage supports 5.5-18V.
Built-in DC/DC supports voltages up to 100V.
Operating environment temperature -40℃ to 105℃.
Available in QFN48 and QFN32 4x4 packages.
Suitable for various applications: garden tools, high-voltage server fans, motor control.

[New Product Preview]

MM32SPIN060G

(with Four-Wire Burning)

MM32SPIN060G is a high-performance single motor control SOC product under MindMotion MindSPIN, which adopts Cortex-M0 core and integrates a 100V three-phase N-channel gate driver.

Storage and computational resources: 32KB Flash, 4KB SRAM, maximum main frequency of 60MHz.
7 timer resources: 1 16-bit advanced timer, 1 32-bit general-purpose timer, 3 basic timers, 1 12-bit IWDG, 1 24-bit Systick.
Supports 2 channels of DMA.
Hardware divider HW-Div.
1 12-bit analog-to-digital converter ADC, supports 10 channels, sampling rate of 1Msps.
2 channels of analog comparators COMP, 2 channels of rail-to-rail operational amplifiers OPAMP.
Three-phase N-channel gate driver.
Supports UART/SPI communication.
Supports four-wire burning function.
Operating voltage supports 5.5-18V.
Operating environment temperature -40℃ to 105℃.
Available in QFN32 4x4 package.
Suitable for various applications: server fans, motor control.
Four-Wire Burning:

1. Control signal and burning signal share 4 pins.

2. Integrates complex high-low voltage conversion circuit external circuit.

3. Fully encapsulated, fully integrated mechanical and electrical.

4. Upgrade code without disassembly.

5. Simplifies production process, saves costs for customers in terms of efficiency, maintenance, and external components.

[New Product Preview]

MM32SPIN045C

(with MOFSET)

MM32G0001

Package Forms:

TSSOP20, QFN20
SOP8 (Compatible with various power/ground packages of 8/16-bit MCUs)
For other packages below 20 pins, please contact MindMotion Marketing.

Key Features:

48 MHz M0, 16KB Flash, 2KB RAM
1Msps 12-bit ADC, up to 8 channels
Advanced timer, capable of outputting 4 channels of complementary PWM with dead zone and brake support
1Msps 12-bit ADC, supports result registers for any channel
-40~85℃ industrial grade and -40℃~105℃ extended industrial grade (suffix V)
Wide voltage supply of 2.0-5.5V

Application Direction:

node control, wireless charging, motor control, toys, lighting circuits

emergency firefighting equipment, 8/16-bit MCU upgrades

MM32SPIN0230

Uses high-performance Arm® Cortex-M0 as the core of a 32-bit microcontroller, with a maximum operating frequency of up to 60MHz.
Maximum operating frequency of 60MHz, with a new bus logic, superior to the same specifications.
Flash: 32KB, SRAM: 4KB
Contains a 12-bit ADC, with a sampling speed of up to 1Msps, supports injection function
Contains DMA, supports motor algorithms with a hardware divider
4 general-purpose timers, 1 advanced PWM timer for motor control
1 USART interface (reusable as SPI)
Built-in 2 op-amps and 2 comparators for motor applications (8-bit reference source)
Operating voltage: 2.5V-5.5V
Tj: -40°C-125°C
Packages: TSSOP28, QFN28, TSSOP20, QFN20
Target Markets: bladeless fans, silent ceiling fans, drone ESCs, seat ventilation, server fans

MM32SPIN030C

MM32SPIN030C is a high-performance single motor control SOC product under MindMotion MindSPIN, utilizing the Cortex-M0 core and integrating a three-phase P/N gate driver.

Storage and computational resources: 32KB Flash, 4KB SRAM, with a maximum main frequency of 60MHz.
7 timer resources: 1 16-bit advanced timer, 1 32-bit general-purpose timer, 3 basic timers, 1 12-bit IWDG, 1 24-bit Systick.
Supports 2 channels of DMA.
Hardware divider HW-Div.
1 12-bit analog-to-digital converter ADC, supporting 11 channels, with a sampling rate of 1Msps.
2 channels of analog comparators COMP, 2 channels of rail-to-rail operational amplifiers OPAMP.
Three-phase P/N gate driver.
Supports UART/SPI communication.
Operating voltage supports 7-36V (with 5.5V undervoltage protection, tested to drive motors at 5.9V).
Operating environment temperature -40℃ to 105℃.
Available in TSSOP28 and QFN28 packages.
Suitable for various applications: drones, server fans, motor control.

MM32SPIN080C

MM32SPIN080C is a high-performance single motor control SOC product under MindMotion MindSPIN, utilizing the Cortex-M0 core and integrating a 200V three-phase N-channel gate driver.

Storage and computational resources: 32KB Flash, 4KB SRAM, with a maximum main frequency of 60MHz.
7 timer resources: 1 16-bit advanced timer, 1 32-bit general-purpose timer, 3 basic timers, 1 12-bit IWDG, 1 24-bit Systick.
Supports 2 channels of DMA.
Hardware divider HW-Div.
1 12-bit analog-to-digital converter ADC, supporting 11 channels, with a sampling rate of 1Msps.
2 channels of analog comparators COMP, 2 channels of rail-to-rail operational amplifiers OPAMP.
Three-phase N-channel gate driver.
Supports UART/SPI communication.
Operating voltage supports 7-18V.
Operating environment temperature -40℃ to 105℃.
Available in QFN48 and QFN32 packages.
Suitable for various applications: garden tools, high-voltage server fans, motor control.

Additionally, MindMotion also introduced the application scenarios corresponding to MindMotion main research chips, including refrigerators, washing machines, air conditioners, range hoods, thermostats, vacuum cleaners/hair dryers, E-Bikes, power tools, fascia guns, etc. As well as the characteristics of existing motor solutions, such as: white goods, fan type, sensor-driven square wave type, low-speed transportation.

+1 Like
Add to Favorites

Recommend

Technical Resources

More>

New Products & Solutions

More>

This document is provided by Sekorm Platform for VIP exclusive service. The copyright is owned by Sekorm. Without authorization, any medias, websites or individual are not allowed to reprint. When authorizing the reprint, the link of www.sekorm.com must be indicated.

Integrated Circuits