IMP1834/A/D Dual 5V and 3.3V uP Power Supply Supervisors w/Manual Reset
●Selectable Trip Point Tolerance
■The IMP1834 supervisors simultaneously monitor both 3.3V and 5V power sources and issue reset signals when either supply is out of tolerance. When an out-of-tolerance condition is detected, the output-reset signal of the affected supply becomes active and resets the system microprocessor/ microcontroller. On power-up and after the supply voltage returns to an in-tolerance condition, the reset signal remains active for approximately 350ms. This allows the power supply and system microprocessor to stabilize.
■The IMP1834 supervisors are pin-compatible with devices from Dallas Semiconductor and require up to 40% less current.
■Tolerance levels are independently selectable for both supplies. Tolerance options are 5- and 10-percent for the 5V supply and for the 3.3V supply, 10- and 20-percent.
■The IMP1834 and IMP1834D have push-pull reset output stages. The IMP1834A active LOW reset outputs are open drain devices that can both be connected to either 5 volt or 3.3 volt supply. The IMP1834 and IMP1834A have active LOW reset outputs. The IMP1834D has active HIGH reset outputs.
■All devices can issue reset signals through an internally debounced pushbutton reset input that affects both reset outputs.
■All devices operate over the extended industrial temperature range. Devices are available in 8-pin DIP, surface mount 8-pin SO and 8-pin MicroSO packages. Die are also available.
●Key Features
■Lower power, pin-compatible replacements for the Dallas DS1834
◆40% lower maximum supply current: 30μA vs 50μA
■Monitor 5V and 3.3V supplies simultaneously
■5V and 3.3V power-on reset
■350ms reset time
■Debounced pushbutton reset input
■Push-Pull CMOS output
◆IMP1834, IMP1834D
◆Eliminates external pull-up resistors
◆Active LOW (IMP1834), HIGH (IMP1834D)
■Open drain output
◆IMP1834A
◆Active LOW
■Selectable 5V and 3.3V trip point tolerance
■Internal power drawn from highest input voltage, 5V or 3.3V
■Precision temperature-compensated voltage reference and comparator
■Low-cost surface mount SO, compact MicroSO and DIP packages
■Wide operating temperature, –40°C to +85°C
IMP1834 、 IMP1834EMA 、 IMP1834S 、 IMP1834/D 、 IMP1834A 、 IMP1834AEMA 、 IMP1834AS 、 IMP1834A/D 、 IMP1834D 、 IMP1834DEMA 、 IMP1834DS |
|
|
|
Datasheet |
|
|
|
Please see the document for details |
|
|
|
|
|
MicroSO;SO;DIP |
|
English Chinese Chinese and English Japanese |
|
08/08/05 |
|
Revision:A |
|
|
|
191 KB |
- +1 Like
- Add to Favorites
Recommend
- XBLW Xinbole Analog Chips: Signal Chain Chips (Part 3)
- ept One27® SMT PCB Connectors with a Pitch of 1.27mm is Suitable for Board-to-board Applications ∣ video
- The Installation Advantages, Structural Features and Product Applications of WAGO‘s 2273 Series Compact Wire Connectors ∣ Video
- Greenconn荣获邓白氏企业认证,实力彰显行业领先水平
- 需要充电吗?具有开尔文源引脚的SiC MOSFET DIF120SIC053-AQ加速电动汽车充电过程
- RARA Would Like to Give Customers a “One-stop Solution” with All Kinds of Resistive Products
- ELETE Press-fit With High Electrical Reliability, Suitable For Communications, Automotive Electronics, Medical And Other Industries
All reproduced articles on this site are for the purpose of conveying more information and clearly indicate the source. If media or individuals who do not want to be reproduced can contact us, which will be deleted.