IMP1832 3.3V uP Power Supply Monitor and Reset Circuit
●Push-Button Reset
●Push-Pull Reset Outputs
■The IMP1832 microprocessor supervisor can halt and restart a “hungup” or “stalled” microprocessor, restart a microprocessor after a power failure, and debounce a manual push-button microprocessor reset switch. The IMP1832 features over 40% lower supply current than the pin compatible Dallas Semiconductor DS1832.
■Precision temperature compensated reference and comparator circuits monitor the 3.3V, VCC input voltage. During power-up or when the VCC power supply falls outside selectable tolerance limits, both RESET and RESET become active. When VCC rises above the threshold voltage, the reset signals remain active for an additional 250ms minimum, allowing the power supply and system microprocessor to stabilize. The trip point tolerance signal, TOL, selects the trip level tolerance to be either 10- or 20-percent.
■RESET and RESET outputs are push-pull.
■A debounced manual reset input, PBRST, activates the reset outputs for a minimum period of 250ms.
■Also included is a watchdog timer to stop and restart a microprocessor that is “hung-up”. Three watchdog timeout periods are selectable: 150ms, 610ms and 1,200ms. If the ST input is not strobed LOW before the time-out period expires, a reset is issued.
■Devices are available in 8-pin DIP, 8-pin SO and compact 8-pin MicroSO packages.
●Key Features
■Pin compatible with the Dallas Semiconductor DS1832
◆Over 40% lower supply current
■3.3V supply monitor
■Push-pull output
■Selectable watchdog period
■Debounce manual push-button reset input
■Precision temperature-compensated voltage reference and comparator
■Power-up, power-down and brownout detection
■250ms minimum reset time
■Active LOW and HIGH reset signal
■Selectable trip point tolerance: 10% or 20%
■Low-cost 8-pin DIP/SO and 8-pin MicroSO packages
■Wide operating temperature –40°C to +85°C
Power Supply Monitor 、 Reset Circuit 、 microprocessor supervisor |
|
|
|
Datasheet |
|
|
|
Please see the document for details |
|
|
|
|
|
MicroSO;DIP;SO |
|
English Chinese Chinese and English Japanese |
|
08/08/05 |
|
Revision:A |
|
|
|
131 KB |
- +1 Like
- Add to Favorites
Recommend
- XBLW Xinbole Analog Chips: Signal Chain Chips (Part 3)
- ept One27® SMT PCB Connectors with a Pitch of 1.27mm is Suitable for Board-to-board Applications ∣ video
- The Installation Advantages, Structural Features and Product Applications of WAGO‘s 2273 Series Compact Wire Connectors ∣ Video
- Greenconn荣获邓白氏企业认证,实力彰显行业领先水平
- 需要充电吗?具有开尔文源引脚的SiC MOSFET DIF120SIC053-AQ加速电动汽车充电过程
- IS6630A/C/D with Three-way Output Enables DDR Power Supply Integration, Saving the Space on the PCB Board And the Required Devices
- RARA Would Like to Give Customers a “One-stop Solution” with All Kinds of Resistive Products
- ELETE Press-fit With High Electrical Reliability, Suitable For Communications, Automotive Electronics, Medical And Other Industries
All reproduced articles on this site are for the purpose of conveying more information and clearly indicate the source. If media or individuals who do not want to be reproduced can contact us, which will be deleted.