System 9000 StrainSmart® Data Acquisition System
■System 9000 from Micro-Measurements is a versatile, precision data acquisition instrument system intended for dynamic test and measurement applications.
■The system includes a scanner with 12 channels of strain-gage-based input and 4 optional input slots (thermocouple, high level and piezoelectric). The scanners may be used separately or up to 3 scanners can be used concurrently for a maximum of 48 fully synchronized channels.
■Strain gage channels accept full-, half-, or quarter-bridge configurations and have the required bridge completion components for 120-, 350-, and 1000-ohm bridges. The data is processed in a modern 24-bit digital signal processor and filtering is performed using Finite Impulse Response (FIR), multi-stage filters. This provides excellent noise rejection and stability, and unsurpassed measurement accuracy.
■The Model 9000-16-SM Scanner communicates with a host personal computer (PC) via a DHCP auto configured Ethernet connection (required router not included).
■Micro-Measurements StrainSmart® software is optimal for configuring, controlling, and acquiring data from the System 9000.
●MODEL 9000-16-SM FEATURES
■12 Strain gage channels, sensors supported:
▲Strain gage (quarter-, half-, and full-bridges)
▲Strain-gage-based transducer
■4 Plug-in card slots, available to support:
▲High-level voltage signal
▲Thermocouples
▲Piezoelectric transducers (charge mode and voltage mode)
■Sampling rates: 50,000, 25,000, 10,000 and 5,000 samples/second. Analog-to-digital converters (ADCs) over-sample data at 128 times the selected sample rate, and Finite Impulse Response (FIR) filters provide filtering. All ADCs are sampled simultaneously.
■Expansion to a 48-channel system: Up to three 9000s can be combined to provide 48 channels of fully synchronized data acquisition (36 strain gage plus 12 configurable).
■On-board Data Recording: Supports manual-, time-, and limits-based recording. Pre- and post-trigger data are available for limits-based recording and manually-triggered recording.
■Self-Calibrating (Optional): An NIST-traceable MM Part No. A123 voltage calibration card is available as an accessory. This calibration card provides a high-accuracy voltage source that may be used to calibrate the gain and offset of each channel. MM Part No. A123 is removable and interchangeable and it only needs to be present in the Model 9000 during the self-calibration process.
■Optional analog outputs (Model 9000-16-SM-AO):Provide an analog output for each of the twelve strain gage channels. Bandwidth DC to 19.8 kHz.
|
MODEL 9000-16-SM 、 9000-16-SM 、 Model 9000-16-SM-AO 、 9000-16-SM-AO 、 9000-HL 、 A123 、 9000-PZ 、 9000-TC |
|
|
Data Acquisition System 、 Scanner 、 HIGH-LEVEL INPUT CARD 、 VOLTAGE CALIBRATION CARD 、 PIEZOELECTRIC INPUT CARD 、 THERMOCOUPLE INPUT CARD |
|
|
Datasheet |
|
|
|
|
Please see the document for details |
|
|
|
|
|
|
|
|
|
|
|
English Chinese Chinese and English Japanese |
|
|
14-Oct-2015 |
|
|
Revision: 14-Oct-2015 |
|
|
11373 |
|
|
274 KB |
- +1 Like
- Add to Favorites
Recommend
- Firstohm‘s Superior Anti-Surge Wire Wound Axial Resistor SSWA Series With a low-temperature coefficient and a wide temperature range
- Keysight Announces New Device Modeling Software to Enable One-Stop Workflow
- TE Model 41 Crash Test Accelerometer: Designed for Crush Zone Testing
- The Model EGAS-S398C NCAP Pedestrian Impact Test Sensor Available in Ranges from ±50g to ±2000g
- Wideband Gap Semiconductors: What Modeling Challenges Must We Overcome
- Why Can the Servo Motors Accurately Control the Rotation of the Model Aircraft？
- How to Build AMI Models for DDR5 Memory Interfaces
- Keysight Radio Frequency Device Model Generator Adopted by Samsung Foundry
All reproduced articles on this site are for the purpose of conveying more information and clearly indicate the source. If media or individuals who do not want to be reproduced can contact us, which will be deleted.
Integrated Circuits
Discrete Components
Connectors & Structural Components
Assembly UnitModules & Accessories
Power Supplies & Power Modules
Electronic Materials
Instrumentation & Test Kit
Electrical Tools & Materials
Mechatronics
Processing & Customization
