The Model EGAS-S398C NCAP Pedestrian Impact Test Sensor Available in Ranges from ±50g to ±2000g
The accelerometer has been certified by Euro NCAP for dummy impact and head form test applications and is available in ranges from ±50g to ±2000g. It features silicon semiconductor strain gages in a half-bridge configuration with a nominal 1500Ω impedance. The design also incorporates integral mechanical over-range stops for high-g protection. The MODEL EGAS-S398C accelerometer is temperature compensated for low drift performance. The thermal compensation circuit is installed in an in-line cable module.
Basic information
MEAS
TE Model # MODEL EGAS-S398C
TE Internal #: CAT-PPA0122
The Model EGAS-S398C NCAP Pedestrian Impact Test Sensor is a critically fluid damped accelerometer designed specifically for ATD pedestrian impact and head form testing.
Acceleration Range (±) (g): 50, 100, 250, 500, 1000, 2000Accelerometer Type : MEMS DCNumber of Axes : 1Sensitivity : .035 mVg, .07 mVg, .14 mVg, .28 mVg, .7 mV/g, 1.4 mVgPlug & Play Accelerometer Sensor Type : DC Response Plug & Play Accelerometers
Benefits
* Standard <10mV ZMO
* Linearity <1%
* Transverse Sensitivity <1%
* 2-10Vdc Excitation
* 0.7 Critical Damping Ratio
* Flexible, Low Noise Cable
Applications
* Pedestrian Impact Testing
* ATD Head Form Test
* Shock and Impact Testing
* Transient Drop Testing
* Helmet Impact Testing
- +1 Like
- Add to Favorites
Recommend
- TE Connectivity to acquire antennas business from Laird Connectivity
- Wind Farms On-and Off-shore Reduces Installation Time with TE Connectivity’s New Easy-to-use High Voltage Joints (PHVJ)
- TE Connectivity Acquires Smart Grid Company Kries, Expanding TE’s Smart Grid Monitoring, Protection, Automation Capabilities
- TE Connectivity‘s Raychem USB 3.1 cable provides up to 10 Gb/s data rates and Jacket elongation of 200% minimum
- TE Connectivity and Sekorm Reached A Strategic Cooperation on the Connector Business
- TE Connectivity Acquires ERNI Group AG
- TE Connectivity Launches First-to-market SolderSleeve Device for Space
- TE Connectivity begins expansion of ERNI facility in Germany
This document is provided by Sekorm Platform for VIP exclusive service. The copyright is owned by Sekorm. Without authorization, any medias, websites or individual are not allowed to reprint. When authorizing the reprint, the link of www.sekorm.com must be indicated.