CM 340/CM 440 POWER SUPPLIES FOR 1.0 and 1.2 kW MAGNETRONS @ 2.45 GHz
■The CM 340 is able to power and control most magnetron models within the nominal range of 900 W to 1 kW at 2.45 GHz hile the CM 440 power supply provides the same performance for magnetrons with a nominal maximum power of 1.2 kW at 2.45 GHz.
■The compact and innovative design of these units make them highly competitive alternatives to traditional, transformer based, power supplies. The output power can be adjusted from near zero up to 100% using an external analog signal.
■The CM 440 is designed to power the MKS, Alter* TMx12 or TI012 microwave magnetron heads, while the smaller CM 340 power supply is suitable for TMx09. However, both models may be used to power electrically compatible microwave magnetron heads from other manufacturers,
■The CM 340 and CM 440 independently monitor and control the operating status of the magnetron, providing power to drive the correct preheating of the filament and switching off the output in the event of an alarm condition such as over current or over voltage of the magnetron.
■Industry standard electrical terminal blocks with separate terminals for all electrical functions provide simple and easy set up. The high voltage output, carrying the anodic current, is available with an HV connector or, upon request, with a preassembled HV wire.
■The CM 340 and CM 440 are enclosed in a lightweight and compact aluminum housing designed to be easily mounted inside an electrical enclosure. External interlock contacts are provided to allow for the use of industry standard internal safety lockout procedures typical of systems housing high powered supplies.
●Features & Benefits
■compact and lightweight form factor makes it ideal for installations where the space saving is critical
■High efficiency power supply design requiring only air cooling simplifies installation and reduces cost.
■ Medium output ripple makes it suitable for industrial heating applications
■System designed for easy assembly inside an electrical enclosure, with access to the terminal block on the bottom of the unit and output on the top.
Datasheet |
|
|
|
Please see the document for details |
|
|
|
|
|
|
|
English Chinese Chinese and English Japanese |
|
2/18 |
|
|
|
|
|
309 KB |
- +1 Like
- Add to Favorites
Recommend
- Coherent Introduces New WaveShaper Instruments WaveShaper® 1000A, 4000A and 500B for the U- and Super C-Bands
- Electronics Mall of Sekorm Provides More Than 150,000 SKUs, Covering ICs, Motors, Instruments, Electronic Components, and Electronic Materials for Enterprises
- We Power Analytical Instruments That Matter
- The Importance of Slkor Zener Diode MM3Z27 in Precision Measuring Instruments
- As an Authorized Distributor of 1000 Top Brands, Sekorm Covers ICs, Motors, Instruments, Discrete Components, Electronic Materials
- Nidec Instruments Develops a New TiltAC, an Image-stabilizing Module for Smartphone Cameras
- Nidec Instruments Launches High-security Card Reader that Meets International Standard PCI PTS
- YXC Programmable Oscillator 7.3728MHz, Package 7050, Operating Voltage 3.3V, Used in Diagnostic Instruments
All reproduced articles on this site are for the purpose of conveying more information and clearly indicate the source. If media or individuals who do not want to be reproduced can contact us, which will be deleted.