CM 130 POWER SUPPLY FOR 300 W MAGNETRON @ 2.45 GH
■The CM 130 may be configured to operate within two different power output ranges, from 0 to 300 W or, for improved precision at very low power, 0 to 90 W. The output power can be adjusted during operation from near zero up to 90 W or 300 W, depending on the range configuration, using an external, linear 0 - 10 V analog signal.
■The CM 130 incorporates a power factor correction (PFC) stage that provides a usable input line voltage range from 140 VAC to 250 VAC and also stabilizes the filament control. The compact and innovative design of the CM 130 makes it a highly competitive alternative to traditional, transformer based, power supplies.
■The CM 130 is designed to power MKS, Alter® TXA10 microwave magnetron heads, however it may be used to power electrically compatible microwave magnetron heads from other manufacturers. In addition, it autonomously manages the working status of the magnetron, providing power to drive the correct preheating of the filament and to automatically shut off the output power in the event of an alarm condition, such as over current or over voltage of the magnetron.
■The CM 130 is enclosed in a lightweight and compact aluminum housing designed to be easily mounted inside an electrical enclosure. Industry standard electrical terminal blocks with separate terminals for all electrical functions provide simple and easy set up. The high voltage (HV) output, carrying the anodic current and the filament current, is available via two preassembled HV wires. As the unit includes the filament transformer, it should be assembled as close as possible to the magnetron, within the length of output wires.
●Features & Benefits
■Compact and lightweight form factor makes it ideal for applications where space is limited.
■The CM 130 is a highly competitive alternative to larger and heavier traditional L-C power supplies.
■High efficiency power supply design requiring only air cooling simplifies installation and reduces cost.
■Low output ripple makes it suitable for laboratory and professional oven equipment.
■System designed for easy assembly inside an electrical enclosure, with access to the terminal block on the bottom of the unit and output HV wires on the top.
|
compact, air-cooled, switch-mode power supply 、 magnetron power supply 、 POWER SUPPLY |
|
|
|
|
|
Datasheet |
|
|
|
|
Please see the document for details |
|
|
|
|
|
|
|
|
|
|
|
English Chinese Chinese and English Japanese |
|
|
2/18 |
|
|
|
|
|
|
|
|
280 KB |
- +1 Like
- Add to Favorites
Recommend
- Coherent Introduces New WaveShaper Instruments WaveShaper® 1000A, 4000A and 500B for the U- and Super C-Bands
- Electronics Mall of Sekorm Provides More Than 150,000 SKUs, Covering ICs, Motors, Instruments, Electronic Components, and Electronic Materials for Enterprises
- We Power Analytical Instruments That Matter
- The Importance of Slkor Zener Diode MM3Z27 in Precision Measuring Instruments
- As an Authorized Distributor of 1000 Top Brands, Sekorm Covers ICs, Motors, Instruments, Discrete Components, Electronic Materials
- Nidec Instruments Develops a New TiltAC, an Image-stabilizing Module for Smartphone Cameras
- Nidec Instruments Launches High-security Card Reader that Meets International Standard PCI PTS
- YXC Programmable Oscillator 7.3728MHz, Package 7050, Operating Voltage 3.3V, Used in Diagnostic Instruments
All reproduced articles on this site are for the purpose of conveying more information and clearly indicate the source. If media or individuals who do not want to be reproduced can contact us, which will be deleted.
Integrated Circuits
Discrete Components
Connectors & Structural Components
Assembly UnitModules & Accessories
Power Supplies & Power Modules
Electronic Materials
Instrumentation & Test Kit
Electrical Tools & Materials
Mechatronics
Processing & Customization
