OH250370 INTEGRATED LIGHT BARRIERS FRAME-SHAPED 1300

2021-12-24
●Optoelectronic frame light barriers operate using the same principle as the through-beam sensor. A large number of trans-mitters and respective receivers have been integrated into the limbs forming a light curtain.
●The integrated amplifier converts any interruption of a light beam into a switch signal. The frame light barrier is capable of detecting very small objects.
●Either the dynamic or static function of the devices can be selected.
●Parts which move quickly (e.g. in free descent) through the light barrier, are detected in the dynamic mode. Objects that are permanently within the frame or move very slowly, remain undetected. The output remains switched for the set pulse time only.
●The static mode allows for a detection of slow-moving or static conditions. The output remains activated for as long as the object to be detected stays in the active zone.
●An integrated potentiometer allows for adjustment of the response sensitivity.
●A second potentiometer enables adjustment of the output pulse width. Independently of the speed of the part to be detected the device can be adapted to the requirements of the connected control system.
●The switching output function may be selected between nor-mally open (no) and normally closed (nc).application

IPF ELECTRONIC

OH250370OH400370VK200071OH700370OHK00370OHKE0370OHLE0370OHM00370

More

Part#

INTEGRATED LIGHT BARRIERS

More

More

Datasheet

More

More

Please see the document for details

More

More

English Chinese Chinese and English Japanese

2020/2/3

1.3 MB

- The full preview is over. If you want to read the whole 6 page document,please Sign in/Register -
  • +1 Like
  • Add to Favorites

Recommend

All reproduced articles on this site are for the purpose of conveying more information and clearly indicate the source. If media or individuals who do not want to be reproduced can contact us, which will be deleted.

Contact Us

Email: