VEMD2000X01, VEMD2020X01 Silicon PIN Photodiode
Filter is matched with IR emitters operating at wavelength of 830 nm to 950 nm. The photo sensitive area of the chip is 0.23 mm².
●FEATURES
■Package type: surface mount
■Package form: GW, RGW
■Dimensions (L x W x H in mm): 2.3 x 2.3 x 2.8
■AEC-Q101 qualified
■High radiant sensitivity
■Daylight blocking filter matched with 830 nm to 950 nm IR emitters
■Fast response times
■Angle of half sensitivity: φ = ± 15°
■Package matched with IR emitter series VSMB2000X01
■Floor life: 4 weeks, MSL 2a, acc. J-STD-020
■Lead (Pb)-free reflow soldering
■Compliant to RoHS Directive 2002/95/EC and in accordance to WEEE 2002/96/EC
VEMD2000X01 、 VEMD2020X01 、 series VSMB2000X01 、 VEMD2000 、 VEMD2020 |
|
high speed and high sensitive PIN photodiodes 、 Silicon PIN Photodiode |
|
[ High speed photo detector ][ Infrared remote control ][ Infrared data transmission ][ Photo interrupters ][ Shaft encoders ] |
|
Datasheet |
|
|
|
Please see the document for details |
|
|
|
|
|
SMD |
|
English Chinese Chinese and English Japanese |
|
23-Aug-11 |
|
Rev. 1.3 |
|
81962 |
|
138 KB |
- +1 Like
- Add to Favorites
Recommend
- Firstohm‘s Superior Anti-Surge Wire Wound Axial Resistor SSWA Series With a low-temperature coefficient and a wide temperature range
- EPC Launches 2kW, 48 V/12 V DC-DC converter for More Efficient, Smaller, Faster, Bidirectional Converters for Mild-Hybrid Cars
- TT Electronics EBW5216 Busbar Shunt Resistors for High Current Measurements in The Hundreds of Amps Range
- How To Use An EPC Development Board to Evaluate The Performance of A Given GaN FET or IC in Common Applications?
- Stable Voltage Diode BZT52C16 - 16V Regulating Value, 500mW Power, SOD-123 Package
- How to Design a 2 kW 48 V/12 V Bi-Directional Power Module with packaged eGaN® FETs
- Vincotech’s Power Modules‘ Current Carrying Capability of a Standard Solder Able Pin and a Press-fit Pin
- Machined Pin Header and IC Socket
All reproduced articles on this site are for the purpose of conveying more information and clearly indicate the source. If media or individuals who do not want to be reproduced can contact us, which will be deleted.