ATP e.MMC v5.1 Embedded Flash Storage Solution
Smaller than a typical postage stamp, ATP e.MMC comes in a 153-ball fine pitch ball grid array (FBGA package). The tiny footprint makes it perfectly suitable for embedded systems with space constraints but require rugged endurance, reliability and durability in harsh environments.
ATP e.MMC is built to meet the tough demands of industrial applications. As a soldered-down solution, it is secure against constant vibrations. Its industrial temperature rating means that severe scenarios from freezing cold -40°C to blistering hot 105°C will not cause adverse impact on the device or the data in it.
Compliant with the latest JEDEC e.MMC 5.1 Standard (JESD84-B51), ATP e.MMC features Command Queuing and Cache Barrier to enhance random read/write performance; High Speed 400 (HS400) DDR Mode for a bandwidth of up to 400 MB/s; and field firmware update (FFU). Cache Flushing Report ensures the data integrity on cache blocks; Enhanced Strobe in HS400 Mode facilitates faster synchronization between the host and the e.MMC device; and, Secure Write Protection ensures that only trusted entities can protect or unprotect the e.MMC device.
It is backward compatible with previous versions (v4.41/v4.5/v5.0), supporting features such as power-off notifications, packed commands, cache, boot or replay protected memory block (RPMB) partitions, high priority interrupt (HPI), and hardware (HW) reset.
Key Features:
■AEC-Q100 Grade 2 (-40°C~105°C) Compliant
■AEC-Q100 Grade 3 (-40°C~85°C) Compliant
■Extra-high endurance: 2-3X higher than standard e.MMC
■Native SLC NAND with 60K P/E cycle
■Complies with JEDEC e.MMC v5.1 Standard (JESD84-B51)
■153-ball FBGA (RoHS compliant, "green package")
■LDPC ECC engine*
■Designed with 3D NAND
|
E700Pi 、 E600Si 、 E700Pia 、 E600Sia 、 E700Paa 、 E600Saa 、 E700Pc |
|
|
[ Surveillance ][ IoT Gateways ][ 5G Small Cell ][ Automation ][ Test and Measurement ][ Embedded PCs ][ Medical ][ Drones ][ Transportation ][ Networking ][ Mobile/Handheld Computers ] |
|
|
Datasheet |
|
|
|
|
Please see the document for details |
|
|
|
|
|
|
|
|
FBGA |
|
|
English Chinese Chinese and English Japanese |
|
|
07072020 |
|
|
v5.1 |
|
|
|
|
|
1.8 MB |
- +1 Like
- Add to Favorites
Recommend
- ATP Electronics’ Latest pSLC Embedded SSDs Offer Best TCO with Customizable Endurance
- ATP Rapid Diagnostic Test (RDT): Accelerating Failure to Maximize Reliability and Endurance
- News | NAND Flash Storage Solutions for the Data-Driven 5G Era | ATP
- The Benefits of Pseudo SLC (pSLC) Flash with Customizable Endurance
- Extensive Reliability Tests Prove the Suitability of 3D e.MMC MLC and SLC Mode for Demanding Industrial Automotive Application
- The ATP Gym and Coach System: Exercising SSDs to Ensure Total Fitness
- ATP‘s PCB Assembly Solderability Validation Tests
- New Die Package Extends 3D TLC e.MMC Endurance to MLC/SLC Levels of ATP E750Pi/Pc, E650Si/Sc Series e.MMC
All reproduced articles on this site are for the purpose of conveying more information and clearly indicate the source. If media or individuals who do not want to be reproduced can contact us, which will be deleted.
Integrated Circuits
Discrete Components
Connectors & Structural Components
Assembly UnitModules & Accessories
Power Supplies & Power Modules
Electronic Materials
Instrumentation & Test Kit
Electrical Tools & Materials
Mechatronics
Processing & Customization
