852-102 WAGO ETHERNET Accessories 852 8-Port 100BASE-TX Industrial Switch Manual
This section includes an overall summary of the most important safety requirements and notes that are mentioned in each individual section. To protect your health and prevent damage to devices as well, it is imperative to read and carefully follow the safety guidelines.
WAGO Kontakttechnik GmbH & Co. KG reserves the right to provide for any alterations or modifications that serve to increase the efficiency of technical progress. WAGO Kontakttechnik GmbH & Co. KG owns all rights arising from the granting of patents or from the legal protection of utility patents. Third-party products are always mentioned without any reference to patent rights. Thus, the existence of such rights cannot be excluded.
All sequences implemented on Series 852 devices may only be carried out by electrical specialists with sufficient knowledge in automation. The specialists must be familiar with the current norms and guidelines for the devices and automated environments. All changes to the controller should always be carried out by qualified personnel with sufficient sufficient skills in PLC programming.
The device is designed for the IP30 protection class. It is protected against the insertion of solid items and solid impurities up to 2.5 mm in diameter, but not against water penetration. Unless otherwise specified, the device must not be operated in wet and dusty environments.
The components to be supplied Ex Works, are equipped with hardware and software configurations, which meet the individual application requirements. WAGO Kontakttechnik GmbH & Co. KG will be exempted from any liability in case of changes in hardware or software as well as to non-compliant usage of components. Please send your request for modified and new hardware or software configurations directly to WAGO Kontakttechnik GmbH & Co. KG.
Please observe the standards and regulations that are relevant to installation:
• The data and power lines must be connected and installed in compliance with the standards to avoid failures on your installation and eliminate any danger to personnel.
• For installation, startup, maintenance and repair, please observe the accident prevention regulations of your machine (e.g., BGV A 3, "Electrical Installations and Equipment").
• Emergency stop functions and equipment must not be deactivated or otherwise made ineffective. See relevant standards (e.g., DIN EN 418).
• Your installation must be equipped in accordance to the EMC guidelines so electromagnetic interferences can be eliminated.
• Please observe the safety measures against electrostatic discharge according to DIN EN 61340-5-1/-3. When handling the modules, ensure that environmental factors (persons, workplace and packing) are well grounded.
• The relevant valid and applicable standards and guidelines regarding the installation of switch cabinets must be observed.
• One Industrial Switch
• DIN rail bracket
• Protective caps for unused ports
The line of switches from WAGO ensure the scalability of your network infrastructure with outstanding electrical and mechanical characteristics. These robust devices are designed for industrial use and they are fully compliant with IEEE802.3, 802.3u. They have function monitoring and redundant voltage supply with a supply voltage range of 9 ... 48 V. Alarm functions are enabled via DIP switch. Characteristics such as auto negotiation and auto MDI/MDIX (crossover) on all 10/100 BaseTX ports are also realized, as is a store-and-forward switching mode.
|
|
|
|
User's Guide |
|
|
|
|
Please see the document for details |
|
|
|
|
|
|
|
|
|
|
|
English Chinese Chinese and English Japanese |
|
|
2020/04/25 |
|
|
Version 1.0.1 |
|
|
|
|
|
936 KB |
- +1 Like
- Add to Favorites
Recommend
- The Installation Advantages, Structural Features and Product Applications of WAGO‘s 2273 Series Compact Wire Connectors ∣ Video
- WAGO, the Global Leader in Spring Clamp Connection Technology, Signed an Authorized Distributor Agreement with Sekorm
- WAGO, TE, Phoenix, Weidmueller Brought the Latest Connectors in Sekorm Seminar
- Sekorm Becomes Authorized Distributor for Top 3 Connector Manufacturers, Phoenix Contact, WAGO ＆ Weidmueller
- More than 150 Electromechanical Components Brands Cooperate with Sekorm
- The world‘s top suppliers of connectors and structural parts: PhoenixContact, TE Connectivity, Weidmueller, etc.
- Kyocera Brings High Heat Resistance and Space Saving Floating Connectors to Sekorm New Products Online Seminar
- 240+ Global Top IC, Electric Materials Manufacturers Enter Sekorm e-Service Platform to Grow Rapidly in Chinese Market
All reproduced articles on this site are for the purpose of conveying more information and clearly indicate the source. If media or individuals who do not want to be reproduced can contact us, which will be deleted.
Integrated Circuits
Discrete Components
Connectors & Structural Components
Assembly UnitModules & Accessories
Power Supplies & Power Modules
Electronic Materials
Instrumentation & Test Kit
Electrical Tools & Materials
Mechatronics
Processing & Customization
