A1421 High Precision Hall Effect AC-Coupled Differential Sensor IC with Integrated Filter Capacitor Data sheet
●DESCRIPTION
■The A1421, A1422, and A1423 are AC-coupled Hall-effect sensor ICs which include monolithic integrated circuits that switch in response to changing differential magnetic fields created by rotating ring magnets or, when coupled with a magnet, by ferrous targets. This family of devices also includes an integrated capacitor that provides the high accuracy of analog sensing without an external filter capacitor. This reduces cost and components, while improving the reliability of the final sensor solution.
■Magnetic field changes affect the two integrated Hall transducers and then are differentially amplified on the chip. Differential design provides immunity to radial vibration, within the device operating air gap range, by rejection of this common-mode signal change. Steady-state system offsets are eliminated using an on-chip differential bandpass filter with integrated capacitor. This filter also provides relative immunity to interference from electromagnetic sources. The device utilizes advanced temperature compensation for the high-pass filter, sensitivity, and Schmitt trigger switchpoints to guarantee optimal operation to low frequencies over a wide range of air gaps and temperatures.
■Each device includes: a voltage regulator, two Hall transducers, temperature compensating circuitry, a low-level amplifier, bandpass filter, Schmitt trigger, and an output driver. The on-board regulator permits operation with supply voltages from 4.0 to 26.5 V. The output stage can switch 20 mA over the full frequency response range of the device, and is compatible with CMOS logic circuits.
■The devices in this family differ from each other in their switchpoint specifications and their switching polarity. The A1421 has a small hysteresis and asymmetrical switchpoints, with one switchpoint at the zero-crossing. The A1422 has a small hysteresis and symmetrical switchpoints, both near the zero-crossing. The A1423 offers high vibration immunity, by means of its larger hysteresis that establishes symmetrical switchpoints further from the zero-crossing. The output polarities are shown in the Selection Guide table.
■This variety of options provides flexibility for achieving solutions for a wide range of applications, including automotive transmission and crankshaft speed sensing.
■The device package has an operating ambient temperature range –40°C to 150°C , and is provided in a 4-pin plastic SIP. Each package is available in a lead (Pb) free version (suffix, –T) , with a 100% matte tin plated leadfram.
●FEATURES AND BENEFITS
■Integrated tracking capacitor
■Used for sensing motion of ring magnet or ferrous targets
■Wide operating temperature range
■Operation with magnetic input signal frequency from 20 Hz to 30 kHz
■EMI/ESD-resistant
■Large effective air gaps
■4.0 to 26.5 V supply operating range
■Output compatible with CMOS logic families
■Reverse battery protection
■Resistant to mechanical and thermal stress
■Accurate true zero crossing switchpoint (A1421 only)
■High vibration immunity, in running mode (A1423 only)
A1421 、 A1422 、 A1423 、 A1421LK-T [2] 、 A1422LK-T 、 A1423LK-T 、 A1421LK-T |
|
High Precision Hall Effect AC-Coupled Differential Sensor IC 、 Sensor IC 、 AC-coupled Hall-effect sensor ICs |
|
Datasheet |
|
|
|
Please see the document for details |
|
|
|
|
|
SIP |
|
English Chinese Chinese and English Japanese |
|
July 2, 2018 |
|
Rev. 7 |
|
A1421a-DS |
|
1.5 MB |
- +1 Like
- Add to Favorites
Recommend
- Crocus Technology Acquired by Allegro MicroSystems to Accelerate Innovation in TMR Sensing Technology
- SANYO DENKI Launches 140×140×38mm DC Fan with the Lowest Noise in the Industry, Suitable for Cooling Commercial Air Conditioners and Medical Equipment
- SANYO DENKI Launches 140×140×38mm DC Fan with the Lowest Noise in the Industry,Suitable for Cooling Commercial Air Conditioners and Medical Equipment
- Installation of UIY Surface Mounting Isolator/Circulator
- More than 250 IC Manufacturers Choose Sekorm as Authorized Distributor, Building Supply Chain Security
- How To Use An EPC Development Board to Evaluate The Performance of A Given GaN FET or IC in Common Applications?
- Shindengen Launches MF2007SW High-side Nch-MOSFET Gate Driver IC with Reverse Connection and Reverse Current Protection
- MindMotion Honored with Annual Innovative IC Design Award
All reproduced articles on this site are for the purpose of conveying more information and clearly indicate the source. If media or individuals who do not want to be reproduced can contact us, which will be deleted.