Lidar Demonstration Board Drives Lasers with Currents up to 220A with Under 3-ns Pulses Using eGaN FETs
March 2021 — Efficient Power Conversion (EPC) announces the availability of the EPC9150, a 200V, high current, pulsed-laser diode driver demonstration board. In a lidar system, used to create 3-D maps for autonomous vehicle applications, speed and accuracy of object detection is critical. As demonstrated by this board, the rapid transition capability of the EPC2034C eGaN FETs provide power pulses to drive the laser diodes, VCSELs or LEDs up to ten times faster than an equivalent MOSFET and in a small fraction of the area, energy, and cost. Thus, enhancing the overall performance, including accuracy, precision, and processing speed as well as the price of a lidar system.
eGaN® FETs and integrated circuits provide the high current pulses, extremely narrow pulse widths, and small size that make affordable, high performance lidar possible. Using the 200V, 12 square mm, EPC2034C eGaN FET, the EPC9150 can generate a 220A laser pulse peak in a pulse width that is only 2.9 nanoseconds wide. The high current increases the range of the lidar system, while the short pulse width leads to higher resolution, and the tiny size and low cost make eGaN FETs and ICs ideal for lidar applications from automotive to industrial robotics and security.
The EPC9150 ships with an interposer board. The interposer board is a collection of break-away 5mm×5mm square interposer PCBs with footprints to accommodate different lasers, RF connectors, and a collection of other footprints designed for experimentation with different loads. The use of the interposers allows many different lasers or other loads to be mounted, allowing users to test the performance with the load requirements that are appropriate to their application.
- 【Datasheet】Enhancement-Mode Gallium Nitride Technology
- 【Datasheet】Enhancement-Mode Gallium Nitride Technology
- 【Datasheet】Enhancement-Mode Gallium Nitride Technology
- +1 Like
- Add to Favorites
Recommend
- EPC Introduces EPC9157 48V to 12V Demo Board Featuring EPC eGaN FETs and New Renesas DC-DC Controller
- EPC‘s New EPC9165 Bidirectional Converter that Delivers 2kW with 96.8% Peak Efficiency
- Design High-Performance Class-D Audio Amplifiers with EPC’s New Reference Design EPC9192 and eGaN FETs
- Sharge Selects GaN FETs EPC2218 from EPC for High-power USB PD Charger Retro 67 to Achieve the Most Efficient Power Conversion
- EPC Announces EPC9193 eGaN® FET Based 3-Phase BLDC Motor Drive Inverter for Low-Cost E-Bikes, Drones and Robotics
- EPC Launches a 3-phase BLDC Motor Drive Inverter EPC9173 with Embedded Gate Driver Function and a Floating Power GaN FET with 3.3mΩ RDS(on)
- Sekorm Became an Authorized Distributor of EPC(Efficient Power Conversion), Which Brings GaN FET Products
- EPC GaN FETs Enable 75 - 231Ampere Laser Diode Control in Nanoseconds for Advanced Automotive Autonomy
This document is provided by Sekorm Platform for VIP exclusive service. The copyright is owned by Sekorm. Without authorization, any medias, websites or individual are not allowed to reprint. When authorizing the reprint, the link of www.sekorm.com must be indicated.