UU Winding Common Mode Choke Commonly Used in Switching Power Supply: Xiangru Electronic XRUU9.8-10mH-V, Vertical Plug-in Design, Low Loss

2024-11-08 XIANGRU ELECTRONICS Official Website
UU common mode choke,common mode choke,XRUU9.8-10mH-V

Product Summary

Switching power supply is indispensable to any industry, and common mode choke is a common component in power supply, which is mainly used to suppress EMI noise in  AC power supply, especially to eliminate low-frequency common-mode interference. Faced with many and complex application scenarios of switching power supply, the size and performance of internal electronic devices have more stringent requirements. Inductor manufacturer Xiangru  Electronics has developed the corresponding small-size model  XRUU9.8-10mH-V UU common mode choke, which has low loss, vertical plug-in design, and a maximum withstand voltage is 1.5KV. While controlling the cost, it can still maintain excellent performance indicators. The inductor can be used with an EMI filter composed of an X  capacitor and a Y capacitor to suppress EMI interference. The application scenarios are very wide, besides switching power supply, it can also be used in common-mode filtering, driving transformers, current transformers and other fields.


UU common mode choke is composed of two U-shaped Mn-Zn cores assembled together to form a magnetic conductive medium. There is an iron clip matching UU9.8 at  the top, a T375J(94-V0) skeleton at the bottom and a UU9.8 R12K magnetic core in the middle. The wire is wound with 2UEW/QA-1 copper wire with temperature-resistant grade B, and the lead-free tin bar with  Sn/Cu:99.3/0.7 is used to lead out. The insulation impedance is enhanced  with 8562/C insulating paint with temperature-resistant grade F F. Thanks to its structural design, XRUU9.8-10mH-V inductor has the  following product advantages:

1. Compared with magnetic ring common mode choke, UU common mode choke is mainly used to filter low-frequency common-mode interference, which has certain EMI  suppression effect, and can provide effective common-mode noise suppression in a wider frequency range while ensuring the transmission quality of normal signals.

2. The UU common mode choke magnetic core is made of U-shaped Mn-Zn material, with high permeability and low saturated magnetic flux density.

3. UU-type common mode choke is small in size, convenient and simple to wind, and can be standardized in batch production with automatic equipment, with relatively low manufacturing cost.

4. Compared with common mode choke of magnetic ring, the response frequency of UU common mode choke is slightly higher and the compensation db value is larger under the same inductance.


Product Features

Small size, maximum 16.5 mm * 11.5 mm * 17.5 mm;

The winding is convenient, the manufacturing is simple, and only a simple machine is needed for winding;

Low loss, high pressure resistance;

Widely used, can suppress common-mode interference;

It is convenient to install with the base.


Application Area

Switching power supply

Common mode filtering

Driving transformer

Current transformer


Appearance and Size



Electrical of Main Performance Parameters:



Produce

Mass production

  • +1 Like
  • Add to Favorites

Recommend

This document is provided by Sekorm Platform for VIP exclusive service. The copyright is owned by Sekorm. Without authorization, any medias, websites or individual are not allowed to reprint. When authorizing the reprint, the link of www.sekorm.com must be indicated.

Contact Us

Email: