SMAC Electric Gage Actuators Improves Gage R&R (Repeatability and Reproducibility)
SMAC electric Gage Actuators provide you gaging solutions with consistant, fast and precise control of the process. Gage actuators are easy to install and eliminate problems associated with the conventional pneumatic solutions. They reduce maintenance time and cost. These actuators are designed based on SMAC proprietary moving coil technology and include SMAC’s own encoders.
SMAC offers two types of gage actuators: MLA8 sereis (Powered Actuator) and MSA8 sereis (Linear Spring Loaded Probe).
MLA Series
The MLA is an electric gage actuator that provides programmable, precision measurement. It achieves consistent measurement replications and improve your process by reducing gage repeatability and reproducibility (R&R) variation. Repeatable & linearity of force no matter where it is operating in the stroke unlike LVDTs that utilize pneumatics or springs. It achieves smooth and consistent low friction over the entire stroke. The MLA has an internal precision linear guide as well as added side-loading support on the shaft. It can handle higher side-loads than most LVDTs. The MLA8 is the first model in the series and only 8mm in height.
MSA Series
The MSA gage actuator is a simple solution that does not require additional module(s) externally, and allows users to go directly to their PLC / high speed counter card. It can handle higher side-loads and it is far more cost effective than traditional LVDTs. The MSA8 is the first model in the series and compact measuring 95mm x 28mm x 8mm for 10mm stroke.
- +1 Like
- Add to Favorites
Recommend
- SMAC has Introduced A Series of Electric Gauge Actuators that Provide Gauging Solutions
- SMAC: An All-electric Solution Replacing Air Actuators
- Supply Chain Issues Create Opportunities for U.S. Encoder Manufacturer SMAC
- SMAC Demonstrates an Average 50%+ Noise Reduction vs Pneumatics
- SMAC, The World‘s Largest Voice Coil Motor Manufacturer, Signed Authorized Distributor Agreement with Sekorm
- HT35 And HT55 Series Of High Torque Brushless Motors, With Over 10,000 Gauss Flux Density
- Nextron Launched LPM3 Mini Press-fit Machine, Retaining the Widely Praised Advantages of LPM3 with a Smaller Size and Lighter Weight
- Silion Offers RFID Technology for Baggage Process Tracking System to Realize the User’s Automatic Identification and Information Management
This document is provided by Sekorm Platform for VIP exclusive service. The copyright is owned by Sekorm. Without authorization, any medias, websites or individual are not allowed to reprint. When authorizing the reprint, the link of www.sekorm.com must be indicated.