SMAC: An All-electric Solution Replacing Air Actuators
SMAC is an all-electric solution that can be used as a "drop-in" replacement for air actuators.
Electric Cylinders
High speed, compact and price-competitive cylinder actuators that provide an alternative to pneumatic cylinders with superior performance. SMAC electric cylinders offer life cycle well beyond 100 million cycles and the ability to repeat a move within one millisecond with no stiction. The conventional cylinder actuator shape and multiple mounting points allow the electric cylinders to be directly retrofitted in most cases.
Reduce Noise Pollution
In an internal study, SMAC Moving Coil Actuators showed evidence of a 50% reduction in decibels generated by moving coil actuators versus traditional pneumatic actuators.
People who work in a traditional production environment, often accept noise pollution as a necessary occupational hazard. However, evolving moving coil technology is making strides in noise control/reduction. Pneumatics range from 100-120 dBA. SMAC's team averaged this to 110 dBA for the study. (As a point of reference, shouting directly into someone’s ear is rated at 110 dBA.) By comparison, SMAC Moving Coil Actuators came in at 40-60 dBA, depending on conditions, averaging at 50 dBA, literally less than half of the noise produced by pneumatics. This level of noise is comparable to a quiet library or office environment.
While there are methods to muffle pneumatic actuators, few will reduce noise generated to the 40-60 dBA range measured in SMAC Moving Coil Actuators.
The low noise generated by SMAC actuators is attributed to its airless operation. There is no compressed air generation required with SMAC. At the heart of all SMAC actuators is the moving coil, also described as a voice coil actuator. The essential principle is the same as a permanent magnet loudspeaker. The voice coil sits in a strong magnetic field, and by passing a current through the coil a force is generated in either direction.
- +1 Like
- Add to Favorites
Recommend
- SMAC Demonstrates an Average 50%+ Noise Reduction vs Pneumatics
- SMAC has Introduced A Series of Electric Gauge Actuators that Provide Gauging Solutions
- The Inductor Coil Manufacturer Briefly Describes the Performance Indicators of the Inductor Coil for You
- The World‘s Top Strong Magnetic Field Is Built in China: the Coil Life Is Nearly Doubled, and the Power Supply Is Cheap and Powerful
- SMAC Electric Gage Actuators Improves Gage R＆R (Repeatability and Reproducibility)
- Slkor‘s MM1W5V1 Zener Diode with a Nominal Voltage Regulation of 5.1V and Reverse Current is Only 10µA, Can be Used for Protecting Sensors and Actuators
- Inductor Coil Structure and Characteristics
- Supply Chain Issues Create Opportunities for U.S. Encoder Manufacturer SMAC
This document is provided by Sekorm Platform for VIP exclusive service. The copyright is owned by Sekorm. Without authorization, any medias, websites or individual are not allowed to reprint. When authorizing the reprint, the link of www.sekorm.com must be indicated.
Integrated Circuits
Discrete Components
Connectors & Structural Components
Assembly UnitModules & Accessories
Power Supplies & Power Modules
Electronic Materials
Instrumentation & Test Kit
Electrical Tools & Materials
Mechatronics
Processing & Customization
