Application of Thermal Conductive Materials in Charging Piles
In order to meet the effect of reaching full charge in the lowest time, the power of charging piles is often much greater than other charging equipment, especially some fast charging charging piles. Under normal circumstances, when the mobile phone is charging, the charger will heat up, not to mention the large size. "Charger", because the higher the power, the higher the heat it emits, so timely heat dissipation is a problem that the charging pile must solve.
Heating of machinery and equipment is an important factor affecting its performance and reliability. If the heating of machinery and equipment is serious, it may cause the machinery and equipment to short-circuit and crash, or even burn out due to overload. In order to effectively control the heat, it is generally installed on the surface of the heat source. The heat sink or the heat sink, so that the heat can be guided to the outside in time, and if the heat sink is installed directly, the heat dissipation effect is not ideal.
There is a gap between the heat source and the radiator, and even two smooth and flat surfaces cannot be avoided. The presence of air in the gap causes the efficiency of heat transfer to decrease, which affects the heat dissipation effect. In order to effectively control the temperature and improve the heat transfer efficiency, in general, the thermal conductive materials is filled between the radiator and the heat source, the gap between the two is completely filled, the air in the gap is removed, the contact thermal resistance is reduced, and the heat transfer efficiency is improved. Ensure that the charging pile can run for a long time.
- +1 Like
- Add to Favorites
Recommend
- What Does the Thermal Resistance of Thermal Conductive Materials Affect?
- Thermal Grizzly CPU Contact Frame Intel 1700 LT is Now Available
- Bornsun Offers Many Thermal Interface Thermal Conductive Materials that Can be Applied to UPS
- Thermal Grizzly Product Update: AM5 High-Performance Heatspreader with New Nickel Plating
- Comparison of Advantages and Disadvantages of Several Common Thermal Conductive Materials
- Waermtimo WT5902 and WT5921 Series High Thermal Conductive Materials Suitable for VR Glasses Heat Conduction
- Heat Dissipation Application of Thermal Conductive Materials in New Energy Vehicles
- Thermal Grizzly Prepared Four New Products for Intel’s Arrow Lake Processors
This document is provided by Sekorm Platform for VIP exclusive service. The copyright is owned by Sekorm. Without authorization, any medias, websites or individual are not allowed to reprint. When authorizing the reprint, the link of www.sekorm.com must be indicated.
Integrated Circuits
Discrete Components
Connectors & Structural Components
Assembly UnitModules & Accessories
Power Supplies & Power Modules
Electronic Materials
Instrumentation & Test Kit
Electrical Tools & Materials
Mechatronics
Processing & Customization
