APPLYING THERMAL GRIZZLY THERMAL GREASE Quick Start Guide
●Clean the surface of the CPU heat spreader and CPU cooler with a dry cloth or high-percentage isopropanol.
■Apply the thermal grease
●Apply using the Thermal grizzly applicator Mount the applicator to the syringe (Figure 1). Now the grease can be applied as seen in Figure 2. The applied layer should be as thin as possible, but yet cover the entire surface of the CPU heat spreader.
●After the application pull back the plunger slightly, so that the thermal grease returns from the applicator back into the syringe. The applicator may now be unscrewed and the cap can be screwed. Note: If you purchased the syringe in a zip bag, you can safely store the syringe and applicator in the bag until needed for next application.
●Apply with a spatula or plastic card (optional)
●Use a plastic spatula or a plastic card with a straight edge (no metal objects!) Apply an approximately 3 x 3 mm drops and spread it evenly.
●Note: Apply the thermal grease very slowly and with a little pressure.
|
|
|
|
User's Guide |
|
|
|
|
Please see the document for details |
|
|
|
|
|
|
|
|
|
|
|
English Chinese Chinese and English Japanese |
|
|
2015/4/30 |
|
|
|
|
|
|
|
|
316 KB |
- +1 Like
- Add to Favorites
Recommend
All reproduced articles on this site are for the purpose of conveying more information and clearly indicate the source. If media or individuals who do not want to be reproduced can contact us, which will be deleted.
Integrated Circuits
Discrete Components
Connectors & Structural Components
Assembly UnitModules & Accessories
Power Supplies & Power Modules
Electronic Materials
Instrumentation & Test Kit
Electrical Tools & Materials
Mechatronics
Processing & Customization
