Higher Performance 600 V flowPIM 1 + PFC Modules for up to 8 kW, PIM with Two-leg/three-leg Interleaved PFC Circuit
Smaller footprint, bigger engine room: Today’s applications in embedded drive systems demand more compact designs with greater power density. Featuring interleaved power factor correction, Vincotech's 600 V PIM+PFC family is engineered to satisfy that demand while improving efficiency and slashing systems costs.
Equipped with the latest generation chip technology, the flowPIM 1 + PFC modules let you step up performance and deepen the integration in your designs. They also strike the best balance between cost and benefits to give you the biggest bang for your buck. Built to cover a wide power range up to 8 kW, these PIM-with-interleaved-PFC modules ship in the low-inductive industry-standard flow1 housing. All modules are also available with phase-change material.
Benefits
Latest generation 600 V IGBT drives down switching losses
Interleaved PFC featuring 650 V high-speed chips dramatically improves thermal performance while cutting costs
On-board capacitors and shunts streamline PCB design
Integrated thermal sensor simplifies temperature measurement
Various power module configurations for a wide range of system architectures
Features
PIM with two-leg/three-leg interleaved PFC circuit
Wide current range up to 50 A
High-speed 650V chips in the PFC for high switching frequencies
Open emitter configuration for improved motor control
General Info
flow 1 12mm housing
Samples available now
Product schematic see on the right
Target Applications
Industrial
Embedded
- +1 Like
- Add to Favorites
Recommend
- New 600 V FlowPIM 1 + PFC Family for Power Ranges up to 8 Kw | Vincotech
- PUTTING EFFICIENCY FIRST FOR YOU——The new full SiC 3-phase flowPIM 1 + PFC for power ranges up to 11 kW
- Deeper integration at higher power: Vincotech‘s New 3-phase flowPIM 1 + PFC for up to 4.5 kW
- Vincotech‘s PIM-plus-PFC Package for up to 20A in a Compact flow 0 Housing
- Stepping Up Power Density with Vincotech’s PFC Module flow3xANPFC 1
- Vincotech Introduces flowPIM S3 and flowPACK S3 Families Featuring The Latest IGBT M7 Chips
- Vincotech VINcoBOOST X4 Modules Switching Frequencies from 8 to 20kHz for 100 to 200kVA Three-phase PFC Applications
- Vincotech new lanunches 1200V flowPIM®module S3+3xPFC with conversion efficiency ranging as high as >99% and thin Al2O3 substrate facilitates overall thermal design
This document is provided by Sekorm Platform for VIP exclusive service. The copyright is owned by Sekorm. Without authorization, any medias, websites or individual are not allowed to reprint. When authorizing the reprint, the link of www.sekorm.com must be indicated.