Vincotech‘s PIM-plus-PFC Package for up to 20A in a Compact flow 0 Housing
Vincotech's flowPIM 0 + PFC modules combine deeply integrated power modules with active power correction circuits to bring the benefits of both to your application. This module is equipped with power components such as a rectifier, Inverter, and active PFC.
The flowPIM 0 + PFC family is designed for motor drive applications requiring active power factor correction (PFC). In addition to a rectifier and inverter, it features a MOSFET switch and boost diode in the PFC circuit, a shunt resistor, as well as a DC link snubber capacitor. This latest generation module covers input power ranges from below one up to 4kW. The most powerful version is equipped with a SiC boost diode for the highest efficiency and performance. The flowPIM 0 + PFC modules also offer technical benefits such as wide-range input voltage and higher DC link voltages for higher efficiencies.
Features:
Converter+PFC+Inverter
Integrated Shunt Resistor
Open Emitter configuration
Temperature sensor
IGBT3 LL chip technology
Easy paralleling
Low turn-off losses
Positive temperature coefficient
Short tail current
Active PFC offers technical benefits such as wide-range input voltage and higher DC link voltages for higher efficiencies. Thanks to the integrated MOSFET switch, the PFC can be operated at higher switching frequencies, providing huge space and cost savings in the system. The rectifier and PFC are not connected internally for a more EMC-friendly design. The shunt can be used to sense PFC or inverter current. The connection is open, so the shunt’s value may be adjusted via external circuits. The inverter section’s open collector topology enables easy current sensing for each phase.
A 100 nF snubber capacitor for the DC link and an NTC is also integrated. The flowPIM 0 + PFC modules come in 12 and 17-mm, 2-clip flow 0 housing with Press-fit or solder pins.
Benefits:
Deeply integrated to save up to 20% space on the PCB
Supports external gate drive for far greater flexibility in PCB design
Open emitter configuration in the inverter stage for full motor control
Active fast-switching PFC on board boosts efficiency by as much as 30%
Reduces size and cost of onboard components and heat sink
- +1 Like
- Add to Favorites
Recommend
- New 600 V FlowPIM 1 + PFC Family for Power Ranges up to 8 Kw | Vincotech
- Vincotech‘s PFC Module flowANPFC 0: Here To Gear Up Three-phase Applications
- Higher Performance 600 V flowPIM 1 + PFC Modules for up to 8 kW, PIM with Two-leg/three-leg Interleaved PFC Circuit
- Vincotech Introduces flowPIM S3 and flowPACK S3 Families Featuring The Latest IGBT M7 Chips
- Vincotech VINcoBOOST X4 Modules Switching Frequencies from 8 to 20kHz for 100 to 200kVA Three-phase PFC Applications
- Deeper integration at higher power: Vincotech‘s New 3-phase flowPIM 1 + PFC for up to 4.5 kW
- Stepping Up Power Density with Vincotech’s PFC Module flow3xANPFC 1
- Vincotech new lanunches 1200V flowPIM®module S3+3xPFC with conversion efficiency ranging as high as >99% and thin Al2O3 substrate facilitates overall thermal design
This document is provided by Sekorm Platform for VIP exclusive service. The copyright is owned by Sekorm. Without authorization, any medias, websites or individual are not allowed to reprint. When authorizing the reprint, the link of www.sekorm.com must be indicated.