EPC‘s 100V, 35A eGaN IC EPC23102 Boosts Power Density and Simplifies Design
EPC announces the introduction of a 100V, 35A integrated circuit designed for 48V DC-DC conversion used in high-density computing applications and in 48V BLDC motor drives for e-mobility, robotics, and drones.
The EPC23102 eGaN IC is capable of a maximum withstand voltage of 100V, delivering up to 35A load current, while capable of switching speeds greater than 1MHz.
• Key features of the EPC23102 integrated circuit using EPC's proprietary GaN IC technology include integrated input logic interface, level shifting, bootstrap charging, and gate drive buffer circuits controlling 6.6mOhm RDS(on) high side and low side FETs configured as a half-bridge power stage.
• The EPC23102 features a thermally enhanced QFN package with a footprint of just 3.5mm x 5mm, offering an extremely small solution size for the highest power density applications.
When operated in a 48V to 12V buck converter, the EPC23102 delivers greater than 96% peak efficiency at 1MHz switching frequency and around 8 – 17A of continuous load current with a rated current of 35A.
"The ePower family of products makes it easy for designers to take advantage of the significant performance improvements made possible with GaN technology," said Alex Lidow, CEO and co-founder of EPC. "Integrated devices are easier to design, easier to layout, easier to assemble, save space on the PCB, and increase efficiency. Designers can use these devices to make lighter weight and more precise BLDC motor drives, higher efficiency 48V input DC-DC converters, higher fidelity class-d audio systems, and other industrial and consumer applications."
The EPC90147 development board is a 100V maximum device voltage, 35A maximum output current, and half-bridge featuring the EPC23102 ePower Stage IC. The purpose of this board is to simplify the evaluation process of the EPC23102. This 2" x 2" (50.8mm x 50.8mm) board is designed for optimal switching performance and contains all critical components for easy evaluation.
- 【Datasheet】EPC23102 – ePower™ Stage IC, VIN 100 V, ILoad 35 A
- 【Datasheet】EPC23102 – V-IN,100 V, I-Load,35 A ePower™ Stage IC DATASHEET
- 【Datasheet】Enhancement-Mode Gallium Nitride Technology
- 【Datasheet】EPC23102-ePower™ Stage IC DATASHEET
- 【Datasheet】EPC23102 – ePower™ Stage IC DATASHEET
- 【Datasheet】EPC23102 – ePower™Stage IC VIN , 100 V ILoad , 35 A DATASHEET
- 【Datasheet】EPC23102 – ePower™ Stage IC
- 【Datasheet】EPC23102 – ePower™ Stage IC eGaN® FET DATASHEET
- +1 Like
- Add to Favorites
Recommend
- EPC23102 ePower™ Stage GaN IC Shrink Motor Drives and Speed Time-to-Market for eMobility, Power Tools, Robotics, and Drones
- The 150V, 3mΩ EPC2305 and the 200V, 5mΩ EPC2304 GaN FETs offering higher performance and smaller solution size
- 200V, 10mΩ GaN FET EPC2307 Joins Family of Footprint Compatible QFN Packaged Devices for High Efficiency and Design Flexibility
- EPC GaN ICs Simplify Motor Joint Inverter Design for Humanoid Robots
- 65A ePower™ Chipset from Efficient Power Conversion (EPC) Redefines Power Conversion
- Sharge Selects GaN FETs EPC2218 from EPC for High-power USB PD Charger Retro 67 to Achieve the Most Efficient Power Conversion
- Epc Expands Its Family of Footprint Compatible Epower™ Stage ICs to Boost Power Density and Simplify Design for Different Power Requirements
- USB PD 3.1 High Power Density and Low-Profile Solutions using EPC GaN Integrated Power Stage
This document is provided by Sekorm Platform for VIP exclusive service. The copyright is owned by Sekorm. Without authorization, any medias, websites or individual are not allowed to reprint. When authorizing the reprint, the link of www.sekorm.com must be indicated.