JieJie Microelectronics Launched Its Car-grade SGT MOSFET Which VBR(DSS)_Min from 40V to 150V

2023-04-15 JieJie Microelectronics News
SGT MOSFET,car-grade SGT MOSFETs,car-grade JSFET SGT MOSFETs,car-grade Power MOSFET

After launching its industry-leading JSFET® 30 ~ 150V series SGT MOSFETs, JieJie Microelectronics focused on applications such as NEVs and smart grids and launched its car-grade SGT MOSFET devices, as end markets placed greater and greater emphasis on the reliability of power devices, especially because of China's 14th Five-year Plan and the global mandatory requirements for environmental protection and carbon emission reduction. Thirteen products were launched for the first time featuring excellent production capacity, endurance, and performance. The increase of minimum withstand voltage VBR(DSS)_Min from 40V to 150V makes the products suitable for line-fit and after-market onboard medium and low voltage applications: DC-DC synchronous rectification and power-on/off etc. in non-high-voltage subsystems of ADAS, infotainment, and inverter, as well as motor driven, relay, load switch, high-low beam drive and other features in body control modules (BCM).

These car-grade Power MOSFET Devices successively passed three cycles of AEC-Q101 reliability test verification@175℃. The IATF 16949-approved car-grade packaging line incorporating independent intellectual property rights works with PDFN5x6-8L and TO-263-3L packages with high thermal efficiency and low heterogeneous pin electrical characteristics (impedance, inductance, input capacitance), which endows these car-grade JSFET SGT MOSFETs with stable electrical properties and long-term reliability. The RDS(ON)_Typ and Qg_Typ of JMSL0402AGQ are as low as 1.6m and 46nC; the PDFN5x6-8L package used has 50% less area than a conventional DPAK (TO-252-3L) but provides the same heat dissipation effect; moreover, the long-term reliability of devices has been enhanced. Furthermore, this helps reduce the footprint of the ADAS (Adaptive Driving Assistance System) mainboard, making it easier to be embedded into NEVs like HEVs and EVs.

Fan Jun, Marketing Director of Power Discrete Devices at JieJie Microelectronics: "The thirteen car-grade power MOSFETs launched by JieJie Microelectronics are in strict conformity to the IATF 16949 quality management system and the AEC-Q101 reliability verification standard. In response to the harsh environment in which cars are used, the PDFN5x6-8L package is designed with low-stress pins of up to 0.275mm in length (on par with the best in Europe and the United States); defective solder joints can be accurately screened out by an automatic optical detector during PCB assembly (PCBA), thereby assuring the long-term operating stability of devices." 


This series of thirteen car-grade power MOSFETs are in mass production.

  • +1 Like
  • Add to Favorites

Recommend

This document is provided by Sekorm Platform for VIP exclusive service. The copyright is owned by Sekorm. Without authorization, any medias, websites or individual are not allowed to reprint. When authorizing the reprint, the link of www.sekorm.com must be indicated.

Contact Us

Email: