Future Technology Devices International Ltd FT2232D Dual USB to Serial UART/FIFO IC
●The FT2232D is a dual USB to serial UART or FIFO interface with the following advanced features:
■Single chip USB to dual channel serial / parallel ports with a variety of configurations.
■Entire USB protocol handled on the chip. No USB specific firmware programming required.
■Transfer Data Rate 300 to 3 Mbaud.
■USB to parallel FIFO transfer data rate up to 1 megabyte / second.
■Multi-Protocol Synchronous Serial Engine (MPSSE) to simplify synchronous serial protocol (USB to JTAG, USB to I²C, USB to SPI) design.
■CPU-style FIFO interface mode simplifies CPU interface design.
■MCU host bus emulation mode configuration option.
■Fast Opto-Isolated serial interface option.
■FTDI‟s royalty-free Virtual Com Port (VCP) and Direct (D2XX) drivers eliminate the requirement for USB driver development in most cases.
■Highly integrated design includes 3.3V LDO regulator for USB I/O, integrated POR function and on chip clock multiplier PLL (6MHz – 48MHz).
■Asynchronous serial UART interface option with full hardware handshaking and modem interface signals.
■Enhanced bit-bang Mode interface option with RD# and WR# strobes.
■Configurable I/O drive strength.
■Fully assisted hardware or X-On / X-Off software handshaking.
■UART Interface supports 7/8 bit data, 1/2 stop bits, and Odd/Even/Mark/Space/No Parity.
■Operational configuration mode and USB Description strings configurable in external EEPROM over the USB interface.
■Low operating and USB suspend current.
■Supports bus powered, self powered and high-power bus powered USB configurations.
■UHCI/OHCI/EHCI host controller compatible.
■USB 2.0 Full Speed (12Mbits/Second) compatible.
■Extended -40°C to 85°C industrial operating temperature range.
■Compact 48-LD Lead Free LQFP package
■+4.35V to +5.25V single supply operating voltage range.
■Dedicated Windows DLLs available for USB to JTAG, USB to SPI, and USB to I²C applications.
■ESD protection for FT2232D IO‟s:
▲Human Body Model (HBM) ±2kV,
▲Machine Mode (MM) ±100V,
▲Charge Device Model (CDM) ±500V,
▲Latch-up free..
FT2232D 、 FT232BM 、 FT245BM 、 FT2232 、 IRLML6402 、 CSTCR6M00G15 、 CSTLSM00G53 、 SP213ECA 、 MAX213CAI 、 ADM213E 、 MAX3245CAI 、 MAX3245 、 SP213EHCA 、 MAX3187 、 SP491 、 HCPL-2430 、 213 |
|
[ USB to Dual Port RS232 Converters ][ USB to Dual Port RS422 / RS485 Converters ][ USB Instrumentation ][ USB to SPI Bus Interfaces ][ USB Industrial Control ][ Galvanically Isolated Products ][ USB to synchronous serial interface ][ Cellular and cordless phone USB data transfer cables and interfaces ][ USB Smart Card Readers ][ USB MP3 Player Interface ][ USB FLASH Card Reader / Writers ][ Set Top Box PC -USB interface ][ USB Digital Camera Interface ][ USB Bar Code Readers ] |
|
Datasheet |
|
|
|
Please see the document for details |
|
|
|
|
|
LQFP |
|
English Chinese Chinese and English Japanese |
|
18/04/11 |
|
Version 2.05 |
|
FT_000173 |
|
3.4 MB |
- +1 Like
- Add to Favorites
Recommend
- Hi-Speed USB Bridge with enhanced power delivery
- FT232 USB Bridge ICs, a Powerful Chip with a Complete USB Protocol
- FT602 UVC Class SuperSpeed USB3.1 IC and development modules now available!
- When should I choose FT4233HPQ?
- Summary of Chip Encapsulation Type-Is it Used with You?
- Dark tide in the shortage market: chip refurbishment
- The RS3005 Chip Developed by Runic Technology Helped The System MCU to Complete The Power Supply
- Bringing WIFI RF Front-end Chips, Low-noise Amplifiers, 5G Small Base Station RF Chips, CHIPBETTER Announced a Distribution with Sekorm
All reproduced articles on this site are for the purpose of conveying more information and clearly indicate the source. If media or individuals who do not want to be reproduced can contact us, which will be deleted.