FT602 UVC Class SuperSpeed USB3.1 IC and development modules now available!
We are pleased to announce the full scale production of our FT602 USB 3.1 (Gen 1) video class FIFO IC and two accompanying hardware modules. The FT602 supports the streaming of video content from high definition camera equipment, meaning that imaging systems which would have previously only been capable of delivering relatively low resolution material can gain substantially elevated video quality but still run at 60fps frame rates. The UMFT602A and UMFT602X units enable bridging of a FIFO bus to a USB3.0/1 host and are equipped with either HSMC or FMC (LPC) connectors. They provide engineers with a simple and straight forward platform on which to evaluate the functionality of the 32-bit FT602 devices, which can deliver up to 1920 x 1080 resolution at frame rates of 60fps, with up to 4 video input channels being made available.
FTDI CHIP Announces Advanced Evaluation/development modules for USB 3.1 Technology
To complement its FT602 USB 3.1 (Gen 1) video class FIFO IC, which has now gone into full scale production, FTDI Chip has introduced a pair of accompanying hardware modules. The UMFT602A and UMFT602X units enable bridging of a FIFO bus to a USB3.0/1 host and are equipped with either HSMC or FMC (LPC) connectors. They provide engineers with a simple and straight forward platform on which to evaluate the functionality of the 32-bit FT602 devices, which can deliver up to 1920 x 1080 resolution at frame rates of 60fps, with up to 4 video input channels being made available. This should prove particular beneficial in relation to high performance multimedia applications, like streaming of video content captured by HD camera systems.
The UMFT602A/X both incorporate 2 parallel slave FIFO bus protocols - a multi-channel FIFO and a 245 synchronous FIFO. Through their respective integrated FT602 ICs, these modules support USB 3.1 Super Speed (5Gbits/s) as well as USB 2.0 Hi-Speed (480Mbit/s) data transfer rates. They are also capable of delivering data burst rates of up to 400MBytes/s across a 32-bit parallel interface. The UMFT602X has a 70mm x 60mm form factor, while the UMFT602A has dimensions of 78.7mm x 60mm. The design of these modules has been approached in such a way that they can plug directly into the majority of FPGA development platforms on the market, supplied by leading programmable logic vendors like Xilinx and Altera. As daughter cards, the UMFT602A/X units will operate with a FIFO master board which has either a HSMC or FMC connectivity.
- +1 Like
- Add to Favorites
Recommend
- FTDI Offers The FT602 for Industrial Camera, Which Helps Gain Substantially Elevated Video Quality but Still Run At 60fps Frame Rates
- FTDI’s USB ICs FT602, FT232RN and UART ICs FT-X Can Be Integrated into Drone
- FTDI’s FT602 Can Decrease The Complexity of Integrating Industrial Robots into Many Different Fields or Job Roles
- FTDI’s USB Interface Chips FT232R Can Be Integrated into Gaming Controller
- FTDI‘s FT60X Series USB 3.0 to FIFO Interface Bridge Chips Products Are used in Vehicle Radar
- FDTI FT60X Series Products Are Used in Medical Monitoring
- FTDI‘s IC FT60XQ USB 3.0 to FIFO Bridge ICs Products Are Used in Ultrasound Devices
- FTDI’s FT232H, FT2232H and FT4232H Can Be Integrated into 5g Network Devices
This document is provided by Sekorm Platform for VIP exclusive service. The copyright is owned by Sekorm. Without authorization, any medias, websites or individual are not allowed to reprint. When authorizing the reprint, the link of www.sekorm.com must be indicated.
Integrated Circuits
Discrete Components
Connectors & Structural Components
Assembly UnitModules & Accessories
Power Supplies & Power Modules
Electronic Materials
Instrumentation & Test Kit
Electrical Tools & Materials
Mechatronics
Processing & Customization
