UMFT602A/ UMFT602X
●UMFT602A/X is an evaluation/development module with either HSMC or FMC (LPC) connectors for interfacing FTDI's FT602 32bit FIFO bus to USB 3.1 GEN 1 USB video class (UVC) bridge IC with external hardware. The UMFT602A/X allows for bridging a FIFO bus to a USB3.0 host and evaluating the functionality of the FT602.
●As a daughter card, the UMFT602A/X must work with a FIFO master board which has either a HSMC or FMC connector. There are 2 models which provide different FIFO bus interfaces with 32bit data width.
●The modules are designed such that they can plug into most FPGA development platforms supplied by vendors such as Xilinx or Altera. Refer to Ordering Information for module options.
●The UMFT602A/X supports 2 parallel slave FIFO bus protocols (Multi-Channel FIFO / 245 Synchronous FIFO) with a data "burst" rate of up to 400MB/s.
●The UMFT602A/X module has the following features:
■Supports USB 3.1 GEN 1 Super Speed (5Gbps)/USB 2.0 High Speed (480Mbps) transfer
■UVC 1.1, Raw YUV422
■Up to 4 video input channels. One I2C bus master interface for video source device configuration
■Supports multi voltage I/O: 1.8V, 2.5V and 3.3V
■High speed connector for FIFO bus : FMC(Field Programmable Mezzanine Card) or HSMC (High Speed Mezzanine Card)
■FMC connector is compatible with most Xilinx FPGA reference design boards
■HSMC is compatible with most Altera FPGA reference design boards
■Multi powered options: external DC powered, BUS powered, FMC/HSMC powered
■Hardware Reset
■Micro-USB3.0 receptacle
|
|
Datasheet |
|
|
|
Please see the document for details |
|
|
|
|
|
|
|
English Chinese Chinese and English Japanese |
|
2017-02-21 |
|
Version 1.0 |
|
FT_001390 |
|
2 MB |
- +1 Like
- Add to Favorites
Recommend
- FT602 UVC Class SuperSpeed USB3.1 IC and development modules now available!
- Hi-Speed USB Bridge with enhanced power delivery
- FT232 USB Bridge ICs, a Powerful Chip with a Complete USB Protocol
- When should I choose FT4233HPQ?
- Summary of Chip Encapsulation Type-Is it Used with You?
- Dark tide in the shortage market: chip refurbishment
- The RS3005 Chip Developed by Runic Technology Helped The System MCU to Complete The Power Supply
- Bringing WIFI RF Front-end Chips, Low-noise Amplifiers, 5G Small Base Station RF Chips, CHIPBETTER Announced a Distribution with Sekorm
All reproduced articles on this site are for the purpose of conveying more information and clearly indicate the source. If media or individuals who do not want to be reproduced can contact us, which will be deleted.