SELECT-10™ Selective Solder Flux Zero-Halogen, No-Clean
●Kester SELECT-10TM is a zero-halogen no-clean liquid flux designed specifically for the needs of the selective soldering process. Sustained activity within the flux allows for good barrel fill in challenging applications, such as reflowed copper OSP boards or with difficult to solder components. Specific to selective soldering, SELECT-10™ does not spread beyond the spray pattern and will not clog the fluxer head. SELECT-10TM residues are non-tacky for improved cosmetics. SE-LECT-10TM is classified as ROL0 flux under IPC J-STD-004B.
●Performance Characteristics:
■Zero-halogen (none intentionally added)
■Provides good solderability under air atmosphere
■Controlled flux application, flux does not spread beyond the spray pattern
■Non-corrosive, non-conductive and non-tacky residues
■Ability to provide desired hole-fill with preheat temperatures over 135°C
■No Clogging
■Compliant to GR-78-CORE(Telcordia/Bellcore)
■Classified as ROL0 per J-STD-004B
■Pass SIR in raw and preheating condition
|
|
Datasheet |
|
|
|
Please see the document for details |
|
|
|
|
|
|
|
English Chinese Chinese and English Japanese |
|
2018/01/05 |
|
|
|
|
|
248 KB |
- +1 Like
- Add to Favorites
Recommend
- Influence of Terminal Selection and Electroplating Selection on Connector Performance
- How to Select High Power Schottky Rectifier Diodes
- Principles for Selecting Fuses
- What Is the Difference between A Push Button and A Selector Switch?
- Selection Process of Fuses
- Application Scenarios and Parameter Selection of Industrial Router
- How to Select the Type of Self Recovery Fuse for Procurement?
- Types and Selection of Inverter Filters
All reproduced articles on this site are for the purpose of conveying more information and clearly indicate the source. If media or individuals who do not want to be reproduced can contact us, which will be deleted.