Types and Selection of Inverter Filters
According to the application of the inverter filter, it can be divided into the following types:
LC filter: LC filter is suitable for occasions where the harmonic content is not high. A good LC filter can control the distortion rate and control the distortion rate to 8~10%;
Harmonic filter: Harmonic filter is suitable for occasions with high requirements on harmonics. Generally, the distortion rate can be controlled at 2~5%;
Sine wave filter: The sine wave filter combines the advantages of the reactor and the LC filter, which can integrate the waveform of the output end of the inverter into a standard sine wave, and can also solve the problem of long-distance transmission between the inverter and the load. The resulting voltage drop, etc.
Selection Principle of Inverter Filter
1. Define the Required Working Parameters
First, determine the rated working voltage, current, and frequency of the equipment. When taking the rated current of the inverter filter, it cannot be taken too small, otherwise, the inverter filter will be damaged or the life of the inverter filter will be reduced.
However, the rated current should not be too large, because the current will increase the volume of the inverter filter or reduce the electrical performance of the inverter filter. Generally, the rated current of the inverter filter is determined by 1.2~1.5 times the rated current of the equipment.
Determine the Appropriate Type of Inverter Filter
On different occasions, the requirements for current or voltage distortion rates are different, and the corresponding inverter filter should be selected according to the requirements.
Identify the Type of Interference
According to the on-site interference source of the equipment, determine the type of interference noise, whether it is common mode interference or differential mode interference, and then select the frequency converter filter in a targeted manner.
If you encounter a situation where the type of interference cannot be determined, you can determine the filter type of the inverter through actual testing.
Leakage Current
The inverter filter is selected according to the allowable value of the maximum leakage current of the equipment, especially for medical and healthcare equipment.
- +1 Like
- Add to Favorites
Recommend
- What Are the Differences Between Inverter Filters and Reactors?
- Delve into the Features of the Inverter Filter and Explains How does It Work
- CISSOID EVK-PLA1060 Series of On-Board Inverter Reference Designs Ingenuity Facilitates Faster Inverter Development
- The Primary Functions and Purposes of Filters
- Selection and Use of Filters
- Knowles‘ Microstrip Filters Offer a High Repeatability and Temperature Stability from -55℃ to 125℃
- Knowles Precision Devices Introduces the SFSW Series of Hermetic, Panel-Mount EMI Filters
- Planar Filters Continue to Advance
This document is provided by Sekorm Platform for VIP exclusive service. The copyright is owned by Sekorm. Without authorization, any medias, websites or individual are not allowed to reprint. When authorizing the reprint, the link of www.sekorm.com must be indicated.
Integrated Circuits
Discrete Components
Connectors & Structural Components
Assembly UnitModules & Accessories
Power Supplies & Power Modules
Electronic Materials
Instrumentation & Test Kit
Electrical Tools & Materials
Mechatronics
Processing & Customization
